Keyword Index

A

  • ABE Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Accumulative Roll Bonding Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Accumulative roll bonding (ARB) Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Accumulative roll bonding (ARB) Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Accumulative roll bonding (ARB) A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Accumulative roll bonding (ARB) Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Accumulative roll bonding (ARB) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Accumulative roll bonding (ARB) Evaluation of Mechanical Properties, Corrosion Resistance, and Microstructure of an Al 1Wt%Graphene- Al2O3 Hybrid Composite Sheet Produced by Accumulative Roll Bonding [Volume 57, Issue 2, 2024, Pages 222-235]
  • Additive Manufacturing Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • Additive Manufacturing Processing of Ultrafine/nano-grained microstructures through additive manufacturing techniques: a critical review [Volume 57, Issue 2, 2024, Pages 203-221]
  • Additive Manufacturing Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Adonis vernalis extract Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Adsorbent Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Adsorption Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Adsorption Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Adsorption Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Ag Enhancing Conductivity in Nanocomposites: A Comprehensive Review of Silver Nanostructures and Reduced Graphene Oxide (rGO) Reinforcement Effects [Volume 57, Issue 2, 2024, Pages 145-157]
  • Aging Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Aging temperature Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Ag nanoparticles Gene Expression Programming for Green Synthesis of Silver Nanoparticles: Size Evolution [Volume 54, Issue 2, 2021, Pages 180-191]
  • Airbrush Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • AISI 309Si stainless steel Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Al-2wt%Cu Alloy Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Al-4.5 wt% Cu Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Al6061-T6 The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Al-Al3Ni Composites Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering [Volume 57, Issue 2, 2024, Pages 168-176]
  • Al-BN nanocomposite Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Alcohols electrooxidation Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Al/SiC nanocomposite Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Alumina Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Alumina Evaluation of Mechanical Properties, Corrosion Resistance, and Microstructure of an Al 1Wt%Graphene- Al2O3 Hybrid Composite Sheet Produced by Accumulative Roll Bonding [Volume 57, Issue 2, 2024, Pages 222-235]
  • Alumina-zirconia nanocomposite Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Aluminum Alloy Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Aluminum matrix composites (AMCs) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Aluminum powder Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Aluminum titanate Effect of thickness on photoconversion efficiency of Al2TiO5/TiO2/Al2O3 nanocomposite films as photoanode in water splitting [Volume 57, Issue 1, 2024, Pages 48-60]
  • Amine modification Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Amino acid Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Aminolysis Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • Aminolysis Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Amorphous Alloy Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]
  • Analcime Zeolite Membrane Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Anatase Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Annealing Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Annealing heat treatment Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review [Volume 57, Issue 2, 2024, Pages 112-119]
  • Annealing treatment Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Anode Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Anode electrode An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Anodic aluminum oxide Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Anodization Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Anodization Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Anodizing Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Antibacterial Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Antibacterial activity Silver-Doped Nanoclay with Antibacterial Activity [Volume 50, Issue 2, 2017, Pages 124-131]
  • Antibacterial activity Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Antibacterial activity Synthesis and antibacterial performance of Ag/Co2O3/g-C3N4 nanocomposite [Volume 54, Issue 1, 2021, Pages 58-63]
  • Antibacterial activity Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • Antibacterial activity The potential antibacterial application of Mg-doped zinc oxide nanoparticles synthesized through sol-gel method [Volume 57, Issue 1, 2024, Pages 61-67]
  • Antibiofilm PHEMA- PANI coating doped with silver nanoparticles for prevention of catheter-associated urinary tract biofilm infections [Volume 57, Issue 2, 2024, Pages 177-189]
  • Antifungal Synthesis and Characterization of ZnO Nanostructures Grown via a Novel Atmospheric Pressure Solution Evaporation Method [Volume 48, Issue 2, 2015, Pages 85-91]
  • Aqueous Sol-gel The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Artificial Neural Network Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Artificial Neural Network Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Artificial Neural Network Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Asymmetric rolling Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Atherosclerosis Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Atomic-force microscopy Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • ATRP A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Austenite Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Austenitic stainless steels Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Austenitic stainless steels Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Auxetic structure Design of structures using level set topology optimization and strain energy methods [Volume 54, Issue 2, 2021, Pages 163-172]
  • AZ31B Mg alloy Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • AZ31B Mg alloy Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
  • AZ31 Magnesium Alloy Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy [Volume 56, Issue 1, 2023, Pages 68-74]
  • AZ91 Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • AZ91 cast alloy Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]

B

  • B4C Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Ball milling Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Ball milling Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Ball milling Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering [Volume 57, Issue 2, 2024, Pages 168-176]
  • Ball milling The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Band Gap Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Barium hexaferrite Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Barium titanate (BTO) Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • BaTiO3 Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Bending Rigidity On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Beta phase Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • BET surface area Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Bi2S3 Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Bioactive Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Biochar Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Biocompatibility Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Biocompatibility In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Bioglass® Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
  • Biomaterials Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Biomaterials Synthesis and antibacterial performance of Ag/Co2O3/g-C3N4 nanocomposite [Volume 54, Issue 1, 2021, Pages 58-63]
  • Biomaterials Formation of nano-structured tribolayer on Ti-6Al-4V during sliding in a phosphate buffer saline solution [Volume 57, Issue 2, 2024, Pages 128-134]
  • Biomedical Applications A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Biomedical Applications Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Bismuth telluride Review on Various Synthesis Methods of Bismuth Telluride Nanoparticles [Volume 54, Issue 2, 2021, Pages 211-218]
  • BiVO4 Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Bone implant The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Bone Tissue Engineering Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Boundary conditions Design of structures using level set topology optimization and strain energy methods [Volume 54, Issue 2, 2021, Pages 163-172]
  • Bovine bone Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Breast Cancer Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Breast cancer cells Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Bulk materials Review on Various Synthesis Methods of Bismuth Telluride Nanoparticles [Volume 54, Issue 2, 2021, Pages 211-218]
  • Bulk metallic glass Glass formation in Cu50Zr50-xAlx and (Cu50Zr43Al7)100-xNbx alloys [Volume 56, Issue 2, 2023, Pages 205-212]
  • Butylammonium Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]

C

  • Ca addition Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • Cadmium ions Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Calcination Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Calcium Phosphate Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Cantilever nanoswitch Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]
  • Capacitive performance Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • Capacity An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Capacity retention The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Carbon Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Carbon Nanotube On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Carbon Nanotube A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Carbon Nanotube Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Carbon Nanotube Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Carbon Nanotube Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene [Volume 51, Issue 1, 2018, Pages 60-70]
  • Carbon Nanotube Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Carbon Nanotube Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Carbon Nanotube Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Carbon nanotubes Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Carbon nanotubes Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Carbon nanotubes 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Casting parameters Effect of some processing parameters on microstructure and hardness profiles of Al-Al2Cu functionally graded composites prepared in-situ via interaction between molten Al and solid Cu [Volume 57, Issue 1, 2024, Pages 35-47]
  • Catheter PHEMA- PANI coating doped with silver nanoparticles for prevention of catheter-associated urinary tract biofilm infections [Volume 57, Issue 2, 2024, Pages 177-189]
  • Cathode Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Cathode area Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • CaTiO3 Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Cation distribution Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Celestite ore Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • CeO2 nanoparticles Synthesis of nano-sized ceria (CeO2) particles via a cerium hydroxy carbonate precursor and the effect of reaction temperature on particle morphology [Volume 48, Issue 1, 2015, Pages 5-10]
  • Characterization Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Chemical bath precipitation Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Chirality On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Chirality Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Chitosan Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Chitosan Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Chitosan The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Chitosan Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Chopped strand mat Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Circular Simple Shear Extrusion Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • CNF Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • CNT An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • CNTs Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • CO2/CH4 separation Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Coagulation-flocculation Development of heterogeneous nano-zeolite catalyzing Fenton-like oxidation processes for metalworking fluid wastewater treatment: A comparison with conventional methods [Volume 57, Issue 2, 2024, Pages 190-202]
  • Coating Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Coating Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Coating PHEMA- PANI coating doped with silver nanoparticles for prevention of catheter-associated urinary tract biofilm infections [Volume 57, Issue 2, 2024, Pages 177-189]
  • Coating Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Cobalt Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Cobalt Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Cobalt ferrite Magnetic and Structural Investigations of Nanocrystalline Cobalt-Ferrite [Volume 45, Issue 1, 2012, Pages 35-40]
  • Cobalt ferrite Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Cobalt-Zinc A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Co-based alloy Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]
  • COD Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Co-doping Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Co-electrodeposition Fabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties [Volume 51, Issue 2, 2018, Pages 193-200]
  • Co-electrodeposition Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Coercivity field Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • CoFe2O4 Coprecipitation Synthesis of CoFe2O4 Nanoparticles for Hyperthermia [Volume 50, Issue 2, 2017, Pages 105-110]
  • CoFe alloy Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • CO Gas The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • Coherent interface Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Cold densification Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Combustion Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Combustion Synthesis Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Composite Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Composite Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Composite Effects of annealing treatment on microstructure, tensile properties and electrical conductivity of copper-graphene nanocomposite fabricated by accumulative roll bonding [Volume 56, Issue 2, 2023, Pages 194-204]
  • Composite coating Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
  • Compressibility The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Compression Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Conductive nanofibrous Conductive nanofibrous scaffold based on polyvinyl alcohol/cellulose nanocrystals/ reduced graphene oxide composite reinforced with curcumin for wound healing [Volume 57, Issue 1, 2024, Pages 92-103]
  • Conductive polymer Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Congo-Red dye Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Consolidation Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Constrained Stud Pressing An investigation on microstructures and residual stresses of pure copper sheets fabricated by constrained studded pressing [Volume 57, Issue 1, 2024, Pages 104-111]
  • Continuous Dynamic Recrystallization Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Copper Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Copper Effects of annealing treatment on microstructure, tensile properties and electrical conductivity of copper-graphene nanocomposite fabricated by accumulative roll bonding [Volume 56, Issue 2, 2023, Pages 194-204]
  • Copper ferrite Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Copper(I) Iodide Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Copper Oxide Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Copper tube Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Coprecipitation Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Coprecipitation, Magnetic properties, Hyperthermia Coprecipitation Synthesis of CoFe2O4 Nanoparticles for Hyperthermia [Volume 50, Issue 2, 2017, Pages 105-110]
  • Cordierite Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Corrosion Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Corrosion A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Corrosion Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Corrosion Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • Corrosion Evaluation of Mechanical Properties, Corrosion Resistance, and Microstructure of an Al 1Wt%Graphene- Al2O3 Hybrid Composite Sheet Produced by Accumulative Roll Bonding [Volume 57, Issue 2, 2024, Pages 222-235]
  • Corrosion Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Corrosion Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Corrosion behavior Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
  • Corrosion behavior Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]
  • Corrosion Inhibitor Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Corrosion Resistance A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Corrosion Resistance Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Corrosion Resistance Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Corrosion Resistance Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel [Volume 57, Issue 1, 2024, Pages 19-27]
  • Crammed Nano needle- like carbides Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • CrN/Cu composite powder Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Cross rolling Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review [Volume 57, Issue 2, 2024, Pages 112-119]
  • Crystallite Refinement Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Crystallization Processing and Characterization of Nanocrystalline Mica Glass-Ceramics [Volume 45, Issue 1, 2012, Pages 53-56]
  • Crystallization Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Crystal Plasticity Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • CTAB Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Cu-Cr-Zr nanocomposite Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Cu-Fe Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • CuFe2O4 Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • CuO Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • CuO nanoparticles Preparation of CuO nanoparticles by thermal decomposition of double-helical dinuclear copper(II) Schiff-base complexes [Volume 48, Issue 2, 2015, Pages 93-99]
  • CuO nanoparticles Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Cu-Zr-Al Glass formation in Cu50Zr50-xAlx and (Cu50Zr43Al7)100-xNbx alloys [Volume 56, Issue 2, 2023, Pages 205-212]
  • Cytocompatibility The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]

D

  • Damage Extension Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Decomposition Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Deformability Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
  • Deformation based method Processing of Ultrafine/nano-grained microstructures through additive manufacturing techniques: a critical review [Volume 57, Issue 2, 2024, Pages 203-221]
  • Deformation-induced martensitic transformation Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Deformation texture EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Degradation Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Density functional theory Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Density functional theory Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Die exit channel Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Dip coating Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Discharge Capacity Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Doping Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Doping The potential antibacterial application of Mg-doped zinc oxide nanoparticles synthesized through sol-gel method [Volume 57, Issue 1, 2024, Pages 61-67]
  • Double screw extruder The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • DRX Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Duty cycle Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Dyeing Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Dynamic and Metadynamic Recrystallization Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]

E

  • EBSD Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • EBSD Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • EBSD Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • EIS Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • EIS Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Elasticity modulus Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Elastic properties Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Elastic properties Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Electrical conductivity Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition [Volume 57, Issue 1, 2024, Pages 82-91]
  • Electrical resistivity Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Electro Catalyst Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Electrochemical impedance spectroscopy Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Electrochemical Impedance Spectroscopy (EIS) Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Electrochemically exfoliated graphene Utilization of Banana Peels as Biopolymer Nanocomposites: A Preliminary Study on the Addition of Electrochemically Exfoliated Graphene [Volume 57, Issue 2, 2024, Pages 120-127]
  • Electrochemical noise Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Electrochemical properties Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Electrochemical Synthesis Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Electro-chemical test Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Electrode Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Electrode Porosity Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Electrodeposition Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Electrodeposition Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Electrodeposition An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Electrodeposition Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Electrodeposition Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Electromagnetic levitation The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Electron backscatter diffraction (EBSD) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Electron Back Scatter Diffraction (EBSD) Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]
  • Electron Backscattered diffraction Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Electron microscopy Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Electrophoretic deposition The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Electrophoretic deposition Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
  • Electrophoretic deposition (EPD) Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Electroplastic Rolling Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
  • Electrospinning Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Electrospinning Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Electrospinning In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Electrospinning Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Electrospinning Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Electrospun membranes Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • EMI shielding Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Endosseous dental implant Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Enhanced effective surface area Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Equal channel angular pressing Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Equal channel angular pressing (ECAP) Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Equivalent continuum modeling Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Equivalent parameters Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]
  • Exact method Exact solution for the vibrations of cylindrical nanoshells considering surface energy effect [Volume 48, Issue 2, 2015, Pages 113-124]
  • Extract Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Extrusion Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Extrusion Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]

F

  • Fabrication Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
  • Fatigue strength Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Fe3Al intermetallic compound Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • Fe3O4 Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Fenton oxidation Development of heterogeneous nano-zeolite catalyzing Fenton-like oxidation processes for metalworking fluid wastewater treatment: A comparison with conventional methods [Volume 57, Issue 2, 2024, Pages 190-202]
  • Ferrite Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Ferrite nano particles A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Fibrous Composite A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Filling fraction Non-uniform simple shear extrusion (NUSSE) technique as a novel sever plastic deformation technique [Volume 57, Issue 1, 2024, Pages 9-18]
  • Finemet Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Finite deformation Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Finite element Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Finite element Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
  • Finite Element Analysis Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Finite Element Analysis Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Finite element model Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Flexural Strength Investigation of in-situ synthesis of alumina reinforcement and comparative flexural behavior with respect to ex-situ Al2O3 reinforced copper composite [Volume 54, Issue 1, 2021, Pages 101-111]
  • Fluid-solid interaction analysis Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Fluorapatite Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Fracture modes Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Free Vibration Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
  • Friction Stir Processing Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • Friction Stir Processing Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Friction Stir Processing The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Friction Stir Processing Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Friction Stir Processing Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Friction stir welding Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Friction stir welding Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Friction stir welding Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • FTIR Ultrasonic–Assisted Co–Precipitation Method of Preparation of Nanocomposites in The Al2O3–TiO2–ZrO2 System: Characterization and Microsturcture [Volume 45, Issue 1, 2012, Pages 7-12]
  • FTIR Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Fuel Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Fuel cells Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Functionally graded Al-Al2Cu Effect of some processing parameters on microstructure and hardness profiles of Al-Al2Cu functionally graded composites prepared in-situ via interaction between molten Al and solid Cu [Volume 57, Issue 1, 2024, Pages 35-47]
  • Functionally graded coating Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Fuzzy inference system Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]

G

  • Gas condensation The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Gas Phase Photodegradation Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Gd2O3 Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method [Volume 49, Issue 2, 2016, Pages 80-86]
  • Gene Expression Programming Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Gene Expression Programming Gene Expression Programming for Green Synthesis of Silver Nanoparticles: Size Evolution [Volume 54, Issue 2, 2021, Pages 180-191]
  • Genetic Algorithm Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • GIWAXS Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Gold nanoparticles One-Step Synthesis of PEG-Functionalized Gold Nanoparticles: Impact of Low Precursor Concentrations on Physicochemical Properties [Volume 57, Issue 2, 2024, Pages 135-144]
  • Grain Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Grain coarsening Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel [Volume 57, Issue 1, 2024, Pages 19-27]
  • Grain growth Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Grain refinement Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Grain refinement Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Grain refinement Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Grain refinement Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Grain refinement Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Grain refinement Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Grain refinement Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Grain refinement Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
  • Grain refinement Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel [Volume 57, Issue 1, 2024, Pages 19-27]
  • Grain refinement Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]
  • Grain refinement Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review [Volume 57, Issue 2, 2024, Pages 112-119]
  • Grain refinement Processing of Ultrafine/nano-grained microstructures through additive manufacturing techniques: a critical review [Volume 57, Issue 2, 2024, Pages 203-221]
  • Graphene oxide Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Graphene Oxide GO Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
  • Graphene quantum dots Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Graphite Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Green and Chemistry method Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
  • Green Synthesis Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Green Synthesis Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Green Synthesis Gene Expression Programming for Green Synthesis of Silver Nanoparticles: Size Evolution [Volume 54, Issue 2, 2021, Pages 180-191]
  • Green Synthesis Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Green Synthesis Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • Green Synthesis Green Synthesis and Characterization of Cu0.5Zn0.5FeAlO4 Magnetic Nanoparticles with Enhanced Photocatalytic Activity [Volume 57, Issue 2, 2024, Pages 158-167]
  • Growth Restriction Factor Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]

H

  • H2O2-decomposition Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • HA film Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • HAGB& LAGB Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]
  • Hall-Petch analysis Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Hall-Petch law Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Hall-Petch relationship Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel [Volume 57, Issue 1, 2024, Pages 19-27]
  • Hardness profiles Effect of some processing parameters on microstructure and hardness profiles of Al-Al2Cu functionally graded composites prepared in-situ via interaction between molten Al and solid Cu [Volume 57, Issue 1, 2024, Pages 35-47]
  • Haynes 25 Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Heat treatment Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method [Volume 49, Issue 2, 2016, Pages 80-86]
  • Heat treatment A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Heat treatment Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • Heavy metals Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Heterojunction Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]
  • Hierarchical Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Hierarchical Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • High-angle boundaries (HAGBs) Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • High energy ball milling Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • High entropy alloy Synthesis of dual-phase face-centered cubic crystal structure in nanocrystalline AlCoCuFeNi high-entropy alloy [Volume 56, Issue 2, 2023, Pages 233-246]
  • High-entropy alloys Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Higher-order Cauchy-Born rule Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • High Pressure Torsion Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • High-purity Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • High Velocity Ice Impact Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Hill's yield criterion Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Hot Compression Molding Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Hot Compression Simulation Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]
  • Hot extrusion Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Hot extrusion Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Hot extrusion Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Hot extrusion Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Hot rolling Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Human Amniotic Membrane, Antibacterial agent Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Hybrid coating Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
  • Hybrid Nano Composite Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • Hybrid Templating Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Hydrazine Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Hydrogen desorption Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Hydrogen evolution reaction Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Hydrolysis rate Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Hydrophobicity Toward hydrophobicity without surface functionalization through organosilane sol gel coatings on nano-roughed aluminum substrate [Volume 53, Issue 2, 2020, Pages 117-126]
  • Hydrostatic Cyclic Expansion-Extrusion Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Hydroxyapatite A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Hydroxyapatite The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Hydroxyapatite Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Hydroxyapatite Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Hydroxyapatite Nanoparticles A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]

I

  • Implants A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • In2O3 The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • Infiltration Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Inhibition performance Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • Inhomogeneity in deformation Non-uniform simple shear extrusion (NUSSE) technique as a novel sever plastic deformation technique [Volume 57, Issue 1, 2024, Pages 9-18]
  • Injection casting Glass formation in Cu50Zr50-xAlx and (Cu50Zr43Al7)100-xNbx alloys [Volume 56, Issue 2, 2023, Pages 205-212]
  • Injection molding The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • In-situ alloying Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • In situ composite Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • In-situ composites Effect of some processing parameters on microstructure and hardness profiles of Al-Al2Cu functionally graded composites prepared in-situ via interaction between molten Al and solid Cu [Volume 57, Issue 1, 2024, Pages 35-47]
  • In-situ method Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering [Volume 57, Issue 2, 2024, Pages 168-176]
  • Intercritical annealing Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • In vitro corrosion In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Ion Exchange Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

J

  • Joule-heating annealing Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]

K

  • Keywords: Aluminum matrix composite The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Keywords: Synthesis The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Kojic acid A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]

L

  • La0.6Sr0.4Co0.2Fe0.8O3 Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method [Volume 48, Issue 1, 2015, Pages 45-52]
  • La2NiO4 Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Lanthanum nickelate Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Laser-based powder bed fusion (LPBF) Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Laser Powder Bed Fusion (L-PBF) Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Laser welding Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • LCysteine Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Lead ions Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Level set method (LSM) Design of structures using level set topology optimization and strain energy methods [Volume 54, Issue 2, 2021, Pages 163-172]
  • Li2O- doping Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Li-doping Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • LiFePO4 Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Li ion battery An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Li-mica Processing and Characterization of Nanocrystalline Mica Glass-Ceramics [Volume 45, Issue 1, 2012, Pages 53-56]
  • Liquid phase sintering Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Lithium ion batteries Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Lithium-ion batteries The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Lithium-Ion Battery Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Lithium-Ion Battery Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Lithium–sulfur battery Low-cost Li2S-based cathode for lithium sulfur battery [Volume 57, Issue 1, 2024, Pages 68-74]
  • Long billet Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]
  • Long strips Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]
  • Low carbon steel Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Low carbon steel An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Low-carbon steels Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Low-cost Low-cost Li2S-based cathode for lithium sulfur battery [Volume 57, Issue 1, 2024, Pages 68-74]
  • Low temperature degradation process Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • LSM Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Luminescent Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]

M

  • Magnesiothermic reduction Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Magnesiothermic reduction Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Magnesium Evolution of texture in an ultrafine and nano grained magnesium alloy [Volume 48, Issue 1, 2015, Pages 11-16]
  • Magnesium Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures [Volume 48, Issue 2, 2015, Pages 69-83]
  • Magnesium Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Magnesium Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Magnesium The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Magnesium alloy Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Magnesium alloy In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Magnesium alloy Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
  • Magnesium alloys Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Magnesium nickel oxide Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Magnetic nanocarriers Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Magnetic nanoparticles Magnetic and Structural Investigations of Nanocrystalline Cobalt-Ferrite [Volume 45, Issue 1, 2012, Pages 35-40]
  • Magnetic naoparticles Green Synthesis and Characterization of Cu0.5Zn0.5FeAlO4 Magnetic Nanoparticles with Enhanced Photocatalytic Activity [Volume 57, Issue 2, 2024, Pages 158-167]
  • Magnetic properties Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Magnetic properties Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Magnetic properties Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Magnetic properties Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Magnetic properties Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Magnetic properties An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Magnetite Synthesis and characterization of Fe3O4@Ag core-shell: structural, morphological, and magnetic properties [Volume 47, Issue 2, 2014, Pages 97-103]
  • Magnetite Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Magnetron sputtering Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Martensite Laths Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Material An in-silico investigation of biomechanical response of cardiovascular stents during deployment inside a stenotic artery [Volume 57, Issue 2, 2024, Pages 236-256]
  • Matrix microstructure The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • MAX phases Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Mechanical alloying Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Mechanical alloying Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • Mechanical alloying Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Mechanical alloying A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route [Volume 48, Issue 2, 2015, Pages 59-67]
  • Mechanical alloying Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Mechanical alloying Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • Mechanical alloying Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Mechanical alloying Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Mechanical alloying Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Mechanical alloying Synthesis of dual-phase face-centered cubic crystal structure in nanocrystalline AlCoCuFeNi high-entropy alloy [Volume 56, Issue 2, 2023, Pages 233-246]
  • Mechanical Behavior Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Mechanical Behavior Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Mechanically-induced self-sustaining reaction (MSR) Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Mechanical milling Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Mechanical milling Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Mechanical milling Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Mechanical milling Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Mechanical properties Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Mechanical properties Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Mechanical properties Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Mechanical properties Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Mechanical properties Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Mechanical properties EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Mechanical properties A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Mechanical properties Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Mechanical properties New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Mechanical properties Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Mechanical properties Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
  • Mechanical properties Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Mechanical properties Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Mechanical properties Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Mechanical properties The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Mechanical properties Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Mechanical properties Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Mechanical properties Glass formation in Cu50Zr50-xAlx and (Cu50Zr43Al7)100-xNbx alloys [Volume 56, Issue 2, 2023, Pages 205-212]
  • Mechanical properties Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • Mechanical properties Morphology and mechanical properties of 3D printed PCL-PLA-ZnO nanocomposite scaffolds for bone regeneration [Volume 57, Issue 1, 2024, Pages 28-34]
  • Mechanical properties Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Mechanical properties anisotropy Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Mechanism An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Mechanism Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Mechanochemical Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • Mechanochemical Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Melamine Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Melting based method Processing of Ultrafine/nano-grained microstructures through additive manufacturing techniques: a critical review [Volume 57, Issue 2, 2024, Pages 203-221]
  • Meso-porous The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Mesoporous Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Mesoporous Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Mesoporous carbon nitride Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Mesoporous silica Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Mesoporous Silicon Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Meso-scale modeling Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Metallic glass Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Metal matrix composite Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Metal matrix composite Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Metal matrix composite Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Metal–matrix composites Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Metal-matrix composites (MMCs) A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Metal-matrix composites (MMCs) Evaluation of Mechanical Properties, Corrosion Resistance, and Microstructure of an Al 1Wt%Graphene- Al2O3 Hybrid Composite Sheet Produced by Accumulative Roll Bonding [Volume 57, Issue 2, 2024, Pages 222-235]
  • Metalworking fluid Development of heterogeneous nano-zeolite catalyzing Fenton-like oxidation processes for metalworking fluid wastewater treatment: A comparison with conventional methods [Volume 57, Issue 2, 2024, Pages 190-202]
  • Metastable Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • Metastable stainless steels Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review [Volume 57, Issue 2, 2024, Pages 112-119]
  • Methylene Blue Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]
  • Mg The potential antibacterial application of Mg-doped zinc oxide nanoparticles synthesized through sol-gel method [Volume 57, Issue 1, 2024, Pages 61-67]
  • Mg2Ni Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Mg alloys Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • MgO Nanoparticles Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • MgxNi1-xO Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Microcellular Foam Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Micro-crack An investigation on microstructures and residual stresses of pure copper sheets fabricated by constrained studded pressing [Volume 57, Issue 1, 2024, Pages 104-111]
  • Microforming Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Micro-hardness Non-uniform simple shear extrusion (NUSSE) technique as a novel sever plastic deformation technique [Volume 57, Issue 1, 2024, Pages 9-18]
  • Micro hardness optimization Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Microstructural characterization Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Microstructure Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Microstructure A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Microstructure Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Microstructure Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Microstructure Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Microstructure Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Microstructure Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Microstructure Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Microstructure Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Microstructure Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Microstructure Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy [Volume 56, Issue 1, 2023, Pages 68-74]
  • Microstructure Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Microstructure Effect of some processing parameters on microstructure and hardness profiles of Al-Al2Cu functionally graded composites prepared in-situ via interaction between molten Al and solid Cu [Volume 57, Issue 1, 2024, Pages 35-47]
  • Microstructure characterization EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Microstructure properties An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Microwave A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Microwave Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Mild steel Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • Mn Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Mn0.8Zn0.2Fe2O4 Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • MnCo2O4 Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Mo-Cu/Al2O3 Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Mo-Cu alloy Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Modification Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Modification Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
  • Modified-constrained studded pressing An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Molecular Dynamics Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]
  • Mordant dye Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Morphine ampoules Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Morpholine Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Morphology Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Morphology Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Morphology Morphology and mechanical properties of 3D printed PCL-PLA-ZnO nanocomposite scaffolds for bone regeneration [Volume 57, Issue 1, 2024, Pages 28-34]
  • Morphology Enhancing Conductivity in Nanocomposites: A Comprehensive Review of Silver Nanostructures and Reduced Graphene Oxide (rGO) Reinforcement Effects [Volume 57, Issue 2, 2024, Pages 145-157]
  • MTT assay Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Multifunctional finishing Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Multiple step forging Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Multiscale modeling Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Multi-walled carbon nanotube Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Muscovite Particle size and kind of mica in synthesis of nontoxic bronze and gold pearlescent pigments based on nanoencapsulated hematite [Volume 48, Issue 2, 2015, Pages 101-112]

N

  • Nano bentonite Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
  • Nanocarriers Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Nanoclay Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Nanoclay Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Nano composite Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Nano-composite A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route [Volume 48, Issue 2, 2015, Pages 59-67]
  • Nano-composite Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Nanocomposite Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Nanocomposite Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Nanocomposite Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Nanocomposite An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Nanocomposite Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Nanocomposite Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Nanocomposite Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Nanocomposite Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Nanocomposite Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Nanocomposite Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Nanocomposite Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Nanocomposite Enhancing Conductivity in Nanocomposites: A Comprehensive Review of Silver Nanostructures and Reduced Graphene Oxide (rGO) Reinforcement Effects [Volume 57, Issue 2, 2024, Pages 145-157]
  • Nanocomposites Photocatalytic Decolorization of Methyl Orange by Silica-Supported TiO2 Composites [Volume 50, Issue 1, 2017, Pages 43-50]
  • Nanocomposites ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Nanocomposites 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Nanocomposites Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Nanocomposite thin films Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Nano-crystalline Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Nanocrystalline composite Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Nanocrystalline Fe-Si-Ni alloys Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Nanocrystalline materials Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Nanocrystalline powder Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • Nanocrystallization, Soft Magnetic Properties Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]
  • Nanofiber Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Nanoflakes Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Nanogold Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Nano Grain Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Nanoindentation Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Nano layer Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Nanomaterials Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties [Volume 48, Issue 1, 2015, Pages 53-58]
  • Nanomaterials Low temperature synthesis of CaZrO3 nanoceramics from CaCl2–NaCl molten eutectic salt [Volume 48, Issue 1, 2015, Pages 17-25]
  • Nanomaterials Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Nanoparticle Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • Nano particles Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Nano-photocatalyst Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Nanoporous Materials Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Nanopowders Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Nanorod Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • Nano-silica Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Nano-sized Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • Nano-structure Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • Nanostructure Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Nanostructure Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Nanostructure Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • Nanostructure Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Nanostructure Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
  • Nanostructure Enhancing Conductivity in Nanocomposites: A Comprehensive Review of Silver Nanostructures and Reduced Graphene Oxide (rGO) Reinforcement Effects [Volume 57, Issue 2, 2024, Pages 145-157]
  • Nano-structured Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Nanostructured materials Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Nanostructured Multilayers A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Nanostructures Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Nanostructures Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Nanowire Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
  • Nanowires Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Nano zinc oxide Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • Natural bones A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Natural Frequencies Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
  • Nb doping The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • New method Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
  • Ni/Al2O3 nanocomposite Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Ni-based amorphous alloys Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Nickel (II) Schiff base precursor Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]
  • NiCr2O4/Ni-Al spinel oxide Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • NiFe2O4 Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Ni ions release The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Ni-Mo alloy Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • NiO nanoparticles Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]
  • NIPAAm Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Nitinol Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • Nitinol The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Ni-TiO2 An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • NiTi thin film Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Nitrogen doping An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • NMC811 The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Nonlinear vibration Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Nonlocal parameter Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]
  • Non-metal doping Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • Nonograins Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Non-Uniform Simple Shear Extrusion Non-uniform simple shear extrusion (NUSSE) technique as a novel sever plastic deformation technique [Volume 57, Issue 1, 2024, Pages 9-18]

O

  • One-step synthesis One-Step Synthesis of PEG-Functionalized Gold Nanoparticles: Impact of Low Precursor Concentrations on Physicochemical Properties [Volume 57, Issue 2, 2024, Pages 135-144]
  • Operating Parameters Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Optical properties Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Optoelectronics Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • Orthorhombic Structure Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

P

  • P3HT Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Palladium nanoparticle Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Palladium Nanoparticles Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]
  • PAN Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • PANI Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Particle size The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Pb-doping Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • PCL Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • PDLA Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Pectin Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • PEG Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • PEG The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Penetrator Steel Grain refinement tracing of dynamic and metadynamic recrystallization for a Penetrator Steel [Volume 57, Issue 1, 2024, Pages 75-81]
  • Performance Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Periodic square holes Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]
  • Pervaporation Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Phase field modelling Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Phase Transformation Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Phenetylammonium Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Phlogopite Particle size and kind of mica in synthesis of nontoxic bronze and gold pearlescent pigments based on nanoencapsulated hematite [Volume 48, Issue 2, 2015, Pages 101-112]
  • Photo activity Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • Photocatalysis Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Photocatalysis Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Photocatalysis Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • Photocatalysis Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Photocatalysis Green Synthesis and Characterization of Cu0.5Zn0.5FeAlO4 Magnetic Nanoparticles with Enhanced Photocatalytic Activity [Volume 57, Issue 2, 2024, Pages 158-167]
  • Photocatalyst Photocatalytic Decolorization of Methyl Orange by Silica-Supported TiO2 Composites [Volume 50, Issue 1, 2017, Pages 43-50]
  • Photocatalyst Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Photocatalyst Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Photocatalyst Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Photocatalyst Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Photocatalysts ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Photocatalytic Activity Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Photoconversion efficiency Effect of thickness on photoconversion efficiency of Al2TiO5/TiO2/Al2O3 nanocomposite films as photoanode in water splitting [Volume 57, Issue 1, 2024, Pages 48-60]
  • Photoluminescence Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • Physical properties Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Physical Vapor Deposition Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition [Volume 57, Issue 1, 2024, Pages 82-91]
  • Piezoelectric Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Piezoelectric Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • Piezoelectric microcantilever Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Piezoelectric Polymer Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Pitting Corrosion Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Pitting Corrosion Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Planetary ball milling Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Planetary rolling Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Plasma electrolytic oxidation (PEO) Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Plasma electrolytic oxidation (PEO) Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
  • Plasma electrolytic oxidation (PEO) Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]
  • Plasma spray Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Platinum nanoparticle Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Platinum Nanoparticles Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]
  • Poisson’s ratio Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Polyaniline Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • Polyaniline Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Polyaniline PHEMA- PANI coating doped with silver nanoparticles for prevention of catheter-associated urinary tract biofilm infections [Volume 57, Issue 2, 2024, Pages 177-189]
  • Polycaprolactone polymer In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Polymer A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Polymer Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Polymeric coatings Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Polymeric nanocarriers Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Polystyrene A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Polysulfone Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Polyvinylidene Fluoride Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Polyvinylidene fluoride (PVDF) Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Polyvinylidene fluoride (PVDF) Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • Pore volume Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Porous Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Porous graphene Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Porous material Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Porous Oxide Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Powder metallurgy Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Powder metallurgy The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Powder metallurgy Synthesis of dual-phase face-centered cubic crystal structure in nanocrystalline AlCoCuFeNi high-entropy alloy [Volume 56, Issue 2, 2023, Pages 233-246]
  • Powder metallurgy Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering [Volume 57, Issue 2, 2024, Pages 168-176]
  • Precipitation Particle size and kind of mica in synthesis of nontoxic bronze and gold pearlescent pigments based on nanoencapsulated hematite [Volume 48, Issue 2, 2015, Pages 101-112]
  • Precursor concentration One-Step Synthesis of PEG-Functionalized Gold Nanoparticles: Impact of Low Precursor Concentrations on Physicochemical Properties [Volume 57, Issue 2, 2024, Pages 135-144]
  • Preferential growth Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Process Control Agent Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Process Parameters, Sol-Gel Methods Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Process window Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • PTCAP Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Pulsed current densities Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Pulse electrodeposition Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method [Volume 49, Issue 2, 2016, Pages 80-86]
  • Pure Copper Sheet An investigation on microstructures and residual stresses of pure copper sheets fabricated by constrained studded pressing [Volume 57, Issue 1, 2024, Pages 104-111]
  • PVA Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant [Volume 47, Issue 2, 2014, Pages 105-112]
  • PVA Conductive nanofibrous scaffold based on polyvinyl alcohol/cellulose nanocrystals/ reduced graphene oxide composite reinforced with curcumin for wound healing [Volume 57, Issue 1, 2024, Pages 92-103]

Q

  • Quenching-tempering processing Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]

R

  • Rapid solidification Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Rare-earth addition Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Reactive blue 222 degradation Green Synthesis and Characterization of Cu0.5Zn0.5FeAlO4 Magnetic Nanoparticles with Enhanced Photocatalytic Activity [Volume 57, Issue 2, 2024, Pages 158-167]
  • Recrystallization Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures [Volume 48, Issue 2, 2015, Pages 69-83]
  • Recrystallization Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Recrystallization The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Recrystallization Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Reduced Graphene Oxide, Orientation, Grafting, Functionalization, Nano-hybrid Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene [Volume 51, Issue 1, 2018, Pages 60-70]
  • Reflux Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Refractory Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Remazole-Red dye Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Residual stress A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Residual stress An investigation on microstructures and residual stresses of pure copper sheets fabricated by constrained studded pressing [Volume 57, Issue 1, 2024, Pages 104-111]
  • Resistive Evaporation Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • Response Surface Methodology Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Re-strengthening Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Reversion annealing Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Rice Husk Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Rice Husk Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Rice Husk Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Rietveld refinement method A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Rietveld refining Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Rod-like Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Ruddelsden-Popper Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Rudllesden-popper Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Rutile Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]

S

  • SAXS Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Scaffold 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Scanning Electron Microscopy Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • Seebeck Coefficient Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition [Volume 57, Issue 1, 2024, Pages 82-91]
  • Selective laser melting (SLM) Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • Self-cleaning Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • SEM Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]
  • Sensor Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Severe Plastic Deformation Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Severe Plastic Deformation Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Severe Plastic Deformation Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Severe Plastic Deformation Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Severe Plastic Deformation Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Severe Plastic Deformation Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Severe Plastic Deformation Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Severe Plastic Deformation Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Severe Plastic Deformation Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]
  • Severe Plastic Deformation Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Severe Plastic Deformation Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Severe Plastic Deformation An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Severe Plastic Deformation (SPD) Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Sever plastic deformation Non-uniform simple shear extrusion (NUSSE) technique as a novel sever plastic deformation technique [Volume 57, Issue 1, 2024, Pages 9-18]
  • Shape Memory Alloys Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
  • Shape sensitivity analysis Design of structures using level set topology optimization and strain energy methods [Volume 54, Issue 2, 2021, Pages 163-172]
  • Shear Texture Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Sheet workpiece Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • SHS Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • SiC The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Silane sol-gel coating Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Silica Fume Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant [Volume 47, Issue 2, 2014, Pages 105-112]
  • Silica Nanoparticles Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Silica Nanoparticles Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Silica Nanoparticles The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Silica Particle Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Silica-supported TiO2 Photocatalytic Decolorization of Methyl Orange by Silica-Supported TiO2 Composites [Volume 50, Issue 1, 2017, Pages 43-50]
  • Silicon Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
  • Silicon Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Silicon carbide Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Silicone rubber Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Silver nanoparticles Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Simple rollers Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Simulated Annealing Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • SiO2 Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • SiO2-CNT Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Size-dependency Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
  • Size Effect, Taylor factor Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Sm2O3 nanoparticles Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • SnO2 Sensor The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • SnS2 Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Sodium phosphate Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • SOFCs Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Soft Magnetic Composite Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Sol-gel Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Sol-gel Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Sol-gel Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Sol-gel Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Sol-gel Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Sol-gel Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Sol-gel 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Sol-gel Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • Sol-gel Effect of thickness on photoconversion efficiency of Al2TiO5/TiO2/Al2O3 nanocomposite films as photoanode in water splitting [Volume 57, Issue 1, 2024, Pages 48-60]
  • Sol-gel auto-combustion Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Solid ion exchange Silver-Doped Nanoclay with Antibacterial Activity [Volume 50, Issue 2, 2017, Pages 124-131]
  • Solid Oxide Cell Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Solid Oxide Fuel Cell Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method [Volume 48, Issue 1, 2015, Pages 45-52]
  • Solid-state ion exchange ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Solution Combustion Synthesis Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Solution Combustion Synthesis Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Solution parameters Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Solvent Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Solvothermal Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Solvothermal synthesis Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Spark plasma sintering (SPS) Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Spd Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures [Volume 48, Issue 2, 2015, Pages 69-83]
  • Specific capacitance Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Specific surface area Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Spectroscopy Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Speed asymmetry Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • SPION The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • SPS method The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Sputtering Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Stabilization Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Stainless Steels Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Stainless Steels Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel [Volume 57, Issue 1, 2024, Pages 19-27]
  • Stenotic artery An in-silico investigation of biomechanical response of cardiovascular stents during deployment inside a stenotic artery [Volume 57, Issue 2, 2024, Pages 236-256]
  • Stent deployment An in-silico investigation of biomechanical response of cardiovascular stents during deployment inside a stenotic artery [Volume 57, Issue 2, 2024, Pages 236-256]
  • Strain energy based method Design of structures using level set topology optimization and strain energy methods [Volume 54, Issue 2, 2021, Pages 163-172]
  • Strain hardening rate Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Strain-induced martensitic transformation Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Strain-induced martensitic transformation Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Strengthening mechanisms Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Stress Intensity Factor Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Strontium carbonate Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Structural steel Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Superalloy Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Superplasticity Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Surface analysis Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Surface composites Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Surface Effect Exact solution for the vibrations of cylindrical nanoshells considering surface energy effect [Volume 48, Issue 2, 2015, Pages 113-124]
  • Surface Mechanical Attrition Treatment (SMAT) Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy [Volume 56, Issue 1, 2023, Pages 68-74]
  • Surface morphology Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Surfactant Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant [Volume 47, Issue 2, 2014, Pages 105-112]
  • Surfactant Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Surfactants Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Synthesis methods Review on Various Synthesis Methods of Bismuth Telluride Nanoparticles [Volume 54, Issue 2, 2021, Pages 211-218]

T

  • Taguchi experimental design Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Targeted therapy Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • TEM Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]
  • TEM Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • TEM Formation of nano-structured tribolayer on Ti-6Al-4V during sliding in a phosphate buffer saline solution [Volume 57, Issue 2, 2024, Pages 128-134]
  • Tensile behavior The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Tensile properties Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Tensile properties Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Tensile properties Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Tensile Property Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Tensile Rigidity On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Tensile Strength Utilization of Banana Peels as Biopolymer Nanocomposites: A Preliminary Study on the Addition of Electrochemically Exfoliated Graphene [Volume 57, Issue 2, 2024, Pages 120-127]
  • Texture Evolution of texture in an ultrafine and nano grained magnesium alloy [Volume 48, Issue 1, 2015, Pages 11-16]
  • Texture Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Texture Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Texture The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Texture Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Texture Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • TGA Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Thermal decomposition A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Thermal stability Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Thermal stability Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Thermal stability Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
  • Thermal stability Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • Thermoelectric Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition [Volume 57, Issue 1, 2024, Pages 82-91]
  • Thermomechanical processing Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Thermomechanical processing Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Thickness Effect of thickness on photoconversion efficiency of Al2TiO5/TiO2/Al2O3 nanocomposite films as photoanode in water splitting [Volume 57, Issue 1, 2024, Pages 48-60]
  • Thin-film Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • Thin Film Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Thin films Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition [Volume 57, Issue 1, 2024, Pages 82-91]
  • Thin layers 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Thiosemicarbazone Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Thymol Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Ti The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Ti2SC Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Ti3AlC2 MAX-phase The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Ti3C2Tx MXene nanolayers The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Ti-5Cu-1Si alloy Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Ti-5Cu alloy Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • Ti-6Al-4V Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]
  • Ti-6Al-4V Formation of nano-structured tribolayer on Ti-6Al-4V during sliding in a phosphate buffer saline solution [Volume 57, Issue 2, 2024, Pages 128-134]
  • Tin oxide 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • TiO2 The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • TiO2 Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • TiO2 Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • TiO2 Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • TiO2 Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • TiO2 nanotube Modifying TiO2 nanotube using N-doping and electrochemical reductive doping as a supercapacitor electrode [Volume 54, Issue 2, 2021, Pages 131-140]
  • TiO2 nanotube arrays Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • TiO2 nanotubes Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • TiO2 nanotubes Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Titania nanoparticles Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Titanium dioxide Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Titanium foam The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Torsional Rigidity On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Transition Metal Oxide Anode Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Transmission Electron Microscopy Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]
  • Transparent glass-ceramic Processing and Characterization of Nanocrystalline Mica Glass-Ceramics [Volume 45, Issue 1, 2012, Pages 53-56]
  • Tribocorrosion Formation of nano-structured tribolayer on Ti-6Al-4V during sliding in a phosphate buffer saline solution [Volume 57, Issue 2, 2024, Pages 128-134]
  • Tribolayer, Nanostructured Formation of nano-structured tribolayer on Ti-6Al-4V during sliding in a phosphate buffer saline solution [Volume 57, Issue 2, 2024, Pages 128-134]
  • Tribological performance Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Triethanol amine Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • TRIP effect Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Tube Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Tungsten alloying Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Turbidity Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Twinning Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Twinning The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]

U

  • Ultrafine grain Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Ultrafine grained aluminum Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Ultrafine Grained Materials Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Ultrafine grained structure Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Ultrafine-grained structure Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Ultrafine grains Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Ultrafine grain surface Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • Ultrafine/nano-grained Processing of Ultrafine/nano-grained microstructures through additive manufacturing techniques: a critical review [Volume 57, Issue 2, 2024, Pages 203-221]
  • Ultra high strength (UHS) steel Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Ultrasonic Ultrasonic–Assisted Co–Precipitation Method of Preparation of Nanocomposites in The Al2O3–TiO2–ZrO2 System: Characterization and Microsturcture [Volume 45, Issue 1, 2012, Pages 7-12]
  • Ultrasonic Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Ultrasonic Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Ultrasonic impact treatment Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Ultrasonic mixing Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Unidirectional rolling Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review [Volume 57, Issue 2, 2024, Pages 112-119]
  • Unzipped MWCNTs Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Urea Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]

V

  • Viscoelastic A study on the role of silica nanoparticles on the viscoelastic behavior of polyethylene [Volume 56, Issue 1, 2023, Pages 21-26]
  • Visible light degradation Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • VPSC Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]

W

  • Wastewater treatment Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
  • Wastewater treatment Development of heterogeneous nano-zeolite catalyzing Fenton-like oxidation processes for metalworking fluid wastewater treatment: A comparison with conventional methods [Volume 57, Issue 2, 2024, Pages 190-202]
  • WC nanoparticle Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Wear Resistance Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • W-H analysis Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Wire Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]
  • Woolen textile Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Workability Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Wound dressing Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Wound healing Conductive nanofibrous scaffold based on polyvinyl alcohol/cellulose nanocrystals/ reduced graphene oxide composite reinforced with curcumin for wound healing [Volume 57, Issue 1, 2024, Pages 92-103]

X

  • X-ray diffraction, Ordering Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • XRD Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • XRD Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]
  • XRD Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]

Y

  • Y addition Effects of heat treatment on the microstructural stability, mechanical properties and degradability of as-cast Mg–1Y and Mg–1Ca alloys: A comparative study [Volume 57, Issue 1, 2024, Pages 1-8]
  • YAG The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]
  • Y-Type Zeolite Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Y-TZP matrix Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]

Z

  • Zener-Hollomon Parameter Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Zeolite Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Zinc Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Zinc alloys Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Zinc oxide Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Zinc oxide The potential antibacterial application of Mg-doped zinc oxide nanoparticles synthesized through sol-gel method [Volume 57, Issue 1, 2024, Pages 61-67]
  • Zinc oxide Nanoparticles Morphology and mechanical properties of 3D printed PCL-PLA-ZnO nanocomposite scaffolds for bone regeneration [Volume 57, Issue 1, 2024, Pages 28-34]
  • ZnO The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • ZnO Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • ZnO Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • ZnO Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • ZnO/bentonite ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • ZnO nanostructures Synthesis and Characterization of ZnO Nanostructures Grown via a Novel Atmospheric Pressure Solution Evaporation Method [Volume 48, Issue 2, 2015, Pages 85-91]
  • ZnO Nanowires Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • ZrO2 nanoparticles Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]