The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application

Document Type : Research Paper

Authors

1 Department of Biomedical Engineering, College of Medical Science and Technologies, Science and Research Branch, Islamic Azad University, Tehran, Iran

2 Department of Materials Sciences, Sharif University of Technology, Tehran, Iran

Abstract

In the present study, the TiO2 nanotubes were coated on the surface of porous Ti foam by the anodization method. The surface of Ti foam before and after coating of TiO2 nanotubes was structurally and morphologically characterized by X-ray diffraction (XRD), field emission electron microscope (FESEM) equipped with energy-dispersive X-ray (EDX). Additionally, the cytocompatibility of TiO2-coated porous Ti foam was evaluated by methyl thiazol tetrazolium (MTT) assay. The results have shown that the anatase crystalline phase was formed on the surface with a uniform thickness of 2.5 µm. Finally, TiO2-coated porous Ti foam was biocompatible and significantly enhanced the proliferation and attachment of MG-63 osteoblast cells compared to the uncoated substrate. All the results postulated that the coating of Ti substrate with TiO2 nanotube shows an excellent promise for dental implant application.

Keywords

References

  1. Rodriguez-Contreras A, Punset M, Calero JA, Gil FJ, Ruperez E, Manero JM. Powder metallurgy with space holder for porous titanium implants: A review. Journal of Materials Science & Technology. 2021;76:129-49.
  2. Qiu G, Wang J, Cui H, Lu T. Mechanical behaviors and porosity of porous Ti prepared with large-size acicular urea as spacer. SN Applied Sciences. 2018;1(1):107.
  3. Lascano S, Arévalo C, Montealegre-Melendez I, Muñoz S, Rodriguez-Ortiz JA, Trueba P, et al. Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique. Applied Sciences. 2019;9(5):982.
  4. Rivard J, Brailovski V, Dubinskiy S, Prokoshkin S. Fabrication, morphology and mechanical properties of Ti and metastable Ti-based alloy foams for biomedical applications. Materials Science and Engineering: C. 2014;45:421-33.
  5. Ahmadi S, Sadrnezhaad S. A novel method for production of foamy core@ compact shell Ti6Al4V bone-like composite. Journal of Alloys and Compounds. 2016;656:416-22.
  6. Perez RA, Mestres G. Role of pore size and morphology in musculo-skeletal tissue regeneration. Materials Science and Engineering: C. 2016;61:922-39.
  7. Cetinel O, Esen Z, Yildirim B. Fabrication, morphology analysis, and mechanical properties of Ti foams manufactured using the space holder method for bone substitute materials. Metals. 2019;9(3):340.
  8. Chappuis V, Maestre L, Bürki A, Barré S, Buser D, Zysset P, et al. Osseointegration of ultrafine-grained titanium with a hydrophilic nano-patterned surface: an in vivo examination in miniature pigs. Biomaterials science. 2018;6(9):2448-59.
  9. Ahmadi S, Mohammadi I, Sadrnezhaad S. Hydroxyapatite based and anodic Titania nanotube biocomposite coatings: Fabrication, characterization and electrochemical behavior. Surface and Coatings Technology. 2016;287:67-75.
  10. Minagar S, Berndt CC, Wang J, Ivanova E, Wen C. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces. Acta biomaterialia. 2012;8(8):2875-88.
  11. Shan AY, Ghazi TIM, Rashid SA. Immobilisation of titanium dioxide onto supporting materials in heterogeneous photocatalysis: A review. Applied Catalysis A: General. 2010;389(1-2):1-8.
  12. Shayegan Z, Lee C-S, Haghighat F. TiO2 photocatalyst for removal of volatile organic compounds in gas phase–A review. Chemical Engineering Journal. 2018;334:2408-39.
  13. Chernozem RV, Surmeneva MA, Ignatov VP, Peltek OO, Goncharenko AA, Muslimov AR, et al. Comprehensive Characterization of Titania Nanotubes Fabricated on Ti–Nb Alloys: Surface Topography, Structure, Physicomechanical Behavior, and a Cell Culture Assay. ACS Biomaterials Science & Engineering. 2020;6(3):1487-99.
  14. Mohan L, Dennis C, Padmapriya N, Anandan C, Rajendran N. Effect of Electrolyte Temperature and Anodization Time on Formation of TiO2 Nanotubes for Biomedical Applications. Materials Today Communications. 2020;23:101103.
  15. Ahmadi S, Riahi Z, Eslami A, Sadrnezhaad SK. Fabrication mechanism of nanostructured HA/TNTs biomedical coatings: an improvement in nanomechanical and in vitro biological responses. J Mater Sci Mater Med. 2016;27(10):150.
  16. Fan X, Feng B, Liu Z, Tan J, Zhi W, Lu X, et al. Fabrication of TiO2 nanotubes on porous titanium scaffold and biocompatibility evaluation in vitro and in vivo. Journal of Biomedical Materials Research Part A. 2012;100A(12):3422-7.
  17. Haghjoo R, Sadrnezhaad SK, Nemati NH. Thin TiO2 Nanocoating of Porous Titanium through Radio Frequency Magnetron Sputtering to Improve the Biological Response of Orthopedic Implants. Journal of Clinical Research in Paramedical Sciences. 2021;10(2).
  18. Committee B. ASTM B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes Principle. ASTM International, nd https://doi org/101520/B0962-17. 2017.
  19. Wheat E, Vlasea M, Hinebaugh J, Metcalfe C. Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing. Materials & Design. 2018;156:167-83.
  20. Wallin RF, Upman P. A Practical Guide to ISO 10993: Part 1–Introduction to the Standards. Medical Device and Diagnostic Industry Magazine. 1998;20:96-9.
  21. Su M, Wang H, Zhou Q, Chen C, Liu K, Hao X. Relationship Between Porosity and Spacer Content of Open Cell Metal Foams. Transactions of the Indian Institute of Metals. 2020;73(3):667-73.
  22. Yang D, Cui Y, Qiu G, Lu T, editors. Investigation of Effect of the Urea Content on the Pore Morphology, Porosity, and Mechanical Behavior of Porous Ti. TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings; 2022 2022//; Cham: Springer International Publishing.
  23. Akbarinia S, Sadrnezhaad SK, Hosseini SA. Porous shape memory dental implant by reactive sintering of TiH2-Ni-Urea mixture. Mater Sci Eng C Mater Biol Appl. 2020;107:110213.
  24. Dezfuli SN, Sadrnezhaad SK, Shokrgozar MA, Bonakdar S. Fabrication of biocompatible titanium scaffolds using space holder technique. J Mater Sci Mater Med. 2012;23(10):2483-8.
  25. Wang X-h, Li J-s, Hu R, Kou H-c. Mechanical properties and pore structure deformation behaviour of biomedical porous titanium. Transactions of Nonferrous Metals Society of China. 2015;25(5):1543-50.
  26. Yoshida K, Mishina H, Sasaki S, Morita M, Mabuchi K. Mechanical Properties of Titanium Cermets for Joint Prostheses. Materials Transactions. 2006;47(2):418-25.
  27. Minagar S, Berndt CC, Wang J, Ivanova E, Wen C. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces. Acta Biomater. 2012 Aug;8(8):2875-88. doi: 10.1016/j.actbio.2012.04.005. Epub 2012 Apr 25. PMID: 22542885.

 

  1. Rasouli R, Barhoum A, Uludag H. A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance. Biomaterials Science. 2018;6(6):1312-38.
  2. Alitabar M, Yoozbashizadeh H. Study on the morphology and photocatalytic activity of TiO2 nanotube arrays produced by anodizing in organic electrolyte with Ni, Na, and C as dopants. Journal of Solid State Electrochemistry. 2018;22(12):3883-93.
  3. Ahmadi S, Riahi Z, Eslami A, Sadrnezhaad SK. Fabrication mechanism of nanostructured HA/TNTs biomedical coatings: an improvement in nanomechanical and in vitro biological responses. Journal of Materials Science: Materials in Medicine. 2016;27(10):150.
  4. Van Bael S, Chai YC, Truscello S, Moesen M, Kerckhofs G, Van Oosterwyck H, et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomaterialia. 2012;8(7):2824-34.
  5. Čapek J, Vojtěch D. Properties of porous magnesium prepared by powder metallurgy. Materials Science and Engineering: C. 2013;33(1):564-9.
  6. Siddiqui DA, Jacob JJ, Fidai AB, Rodrigues DC. Biological characterization of surface-treated dental implant materials in contact with mammalian host and bacterial cells: titanium versus zirconia. RSC Advances. 2019;9(55):32097-109.
  7. Gui N, Xu W, Myers DE, Shukla R, Tang HP, Qian M. The effect of ordered and partially ordered surface topography on bone cell responses: a review. Biomaterials Science. 2018;6(2):250-64.

 

Journal of Ultrafine Grained and Nanostructured Materials
Volume 56, Issue 1
June 2023
Pages 99-107

Files

History

  • Receive Date: 29 September 2022
  • Revise Date: 10 January 2023
  • Accept Date: 25 January 2023

Share

How to cite

Statistics