Journal of Ultrafine Grained and Nanostructured Materials

Journal of Ultrafine Grained and Nanostructured Materials

Keyword Index
A
  • Additive Manufacturing Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Additive manufacturing (AM) Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
  • AISI304 martensitic stainless steel The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
  • AISI420 stainless steels The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
  • AlN Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
  • Aluminum-doped zinc oxide Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
  • Aluminum Nitride Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
  • Annealing treatment Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Anodization Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
  • Austenitic stainless steels Deformation-induced martensitic transformation kinetics in X5CrMnN17-8 austenitic stainless steel [Volume 58, Issue 2, 2025, Pages 197-207]
B
  • Bainite generation Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
  • Ball milling The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Biochar Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Biocompatibility Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
C
  • Capacity retention The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Carbon Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Cation substitution Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
  • Cell differentiation Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
  • Chemical Bath deposition Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
  • Chemical co-precipitation Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
  • Coating Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Controlling agent Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
  • Copper tube Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Corrosion Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Corrosion Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Cr photoreduction Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
  • Crystallinity Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
D
  • Deformation-induced martensite Deformation-induced martensitic transformation kinetics in X5CrMnN17-8 austenitic stainless steel [Volume 58, Issue 2, 2025, Pages 197-207]
  • Dissimilar resistance spot welding The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
  • Double screw extruder The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
E
  • Electrophoretic deposition (EPD) Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Electrospinning Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Electrospinning Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
F
  • Friction Stir Processing Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
G
  • Grain Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Graphene oxide aerogel Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
  • Growth Restriction Factor Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
H
  • H2O2 Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
  • Haynes 25 Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Heterojunction Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]
  • High-entropy alloys The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
  • Human Amniotic Membrane, Antibacterial agent Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Hydrogen production Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
  • Hysteresis Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
I
  • Injection molding The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Interlayer The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
K
  • Kinetic models Deformation-induced martensitic transformation kinetics in X5CrMnN17-8 austenitic stainless steel [Volume 58, Issue 2, 2025, Pages 197-207]
L
  • Laser-based powder bed fusion (LPBF) Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Laser powder bed fusion (LPBF) Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
  • Laser Powder Bed Fusion (L-PBF) Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Late martensite Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
  • Lithium-ion batteries The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Low carbon steel An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
M
  • Magnetic properties An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Magnetic properties Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
  • Mechanical alloying Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
  • Mechanical properties Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Mechanical properties anisotropy Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Methylene Blue Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]
  • Microstructure properties An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Modified-constrained studded pressing An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Multi-directional hot forging Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
N
  • Nano composite Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • Nanooxide coating, Boron-doped Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
  • Nanostructured materials Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
  • Nanostructured spinel ferrites Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
  • Nb doping The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Neural tissue engineering Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
  • NiCr2O4/Ni-Al spinel oxide Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
  • NiFe2O4 and CoFe2O4 nanoparticles Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
  • NMC811 The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
O
  • Oil and water quenching Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
  • Oxidants Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
P
  • PENG Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
  • Perovskite solar cell Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
  • Phase transformation kinetics Deformation-induced martensitic transformation kinetics in X5CrMnN17-8 austenitic stainless steel [Volume 58, Issue 2, 2025, Pages 197-207]
  • Photocatalysis Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
  • Piezoelectric Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
  • Planetary rolling Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Porous material Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Process window Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • PVDF-HFP (Poly Vinylidene Fluoride–Hexa Fluoro Propylene) Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
S
  • Salt bath Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
  • Scaffold fabrication Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
  • Selective laser melting (SLM) Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
  • Severe Plastic Deformation Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Severe Plastic Deformation Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Severe Plastic Deformation An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Silica Nanoparticles The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Simple rollers Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Sn-Zr-Mn Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
  • Stacking fault energy Deformation-induced martensitic transformation kinetics in X5CrMnN17-8 austenitic stainless steel [Volume 58, Issue 2, 2025, Pages 197-207]
  • Superalloy Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Surface composites Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Surface severe plastic deformation (SSPD) Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
T
  • Tensile behavior The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Thermomechanical processing Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Thymol Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Ti-5Cu-1Si alloy Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Ti-based alloys Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
  • TiO₂/CuWO₄ Coatings Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
  • Transparent Conductive Oxide Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
U
  • Ultrasonic Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
  • Ultrasonic impact treatment Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
V
  • Valve steel Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
W
  • Wound dressing Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
Z
  • Zinc oxide Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]