Abachi, Parvin Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
Anjabin, Nozar Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
Asen, Parvin Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
Asgharzadeh Moalem, Abolfazl The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
Ashouri Sharafshadeh, Sina Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
Ataie, Abolghasem The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
Ataie, Maryam Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
Azargoon, Artin Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
B
Babaei, Alireza The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
Bahramian, Hamed Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
Barati, Mohammad Reza Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
Bordbar, Samaneh Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
C
C, Joelin Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
Dehkharghani, Mobin Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
Dehno Khalaji, Aliakbar Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]
E
Ebrahimi, Ramin Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
El-Bitar, taher Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
ElMeligy, Maha Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
Erfan, Mohammad Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
F
Farzad, Hamed Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
Fattah-alhosseini, Arash Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
G
Gamil, Mohammed Development of Valve Steel containing of a Blend of Hard Phases for High-Temperature Applications [Volume 58, Issue 2, 2025, Pages 228-241]
George, Giftlin Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
Gholami, Amir Hossein Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
H
Habibi Parsa, Mohammad Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
Heidariramsheh, Maryam Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
Heidariramsheh, Maryam Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
Hosseini Faregh, SaraSadat An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
Hudha, Mohammad IstnaenyPorous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
J
Jafari, Robabeh Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
K
Karbasi, Minoo Engineering Photocatalytic TiO₂/CuWO₄ Coatings: The Synergistic Effect of Oxidants on Heavy Metal Remediation [Volume 58, Issue 2, 2025, Pages 152-160]
Kashani Bozorg, SEYED FARSHID Mechanical Alloying-Induced Nanostructuring and β-Ti Phase Formation in Ti-Sn-Mn and Ti-Zr-Sn-Mn Powders [Volume 58, Issue 2, 2025, Pages 143-151]
Kaykha, Mohammad Mehdi An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
Khakpour, Zhila Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
Khameneh asl, shahin Effect of Boron Doping on the Structure and Band Gap of ZnO Nanowires Grown by Anodizing: Toward Water Splitting Applications [Volume 58, Issue 2, 2025, Pages 242-254]
Khanahmadisamghabadi, Siavash Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
Kheiri, Mohammad Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
Khorasani, Mohammad Taghi Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
Khosravi, Morteza An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
M
Maali, Mona The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
Madaah Hosseini, Hamid Reza Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
Mazaheri, Yousef Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
Minah, Faidliyah NilnaPorous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
Miresmaeili, Reza Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
Mirzadeh, Hamed Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
Mirzadeh, Hamed Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
Mohammadi, Ali The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
Mohammadzadeh, Hurieh Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]
Moradlou, Omran Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
N
Nemati, Rahim Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
Niroumand, Behzad Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
O
Oukati Sadeq, Fereydon An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
P
Pircheraghi, Gholamreza Nanostructured spinel ferrites NiFe2O4 and CoFe2O4: influence of cation substitution on crystal structure, surface stability, and magnetic behavior [Volume 58, Issue 2, 2025, Pages 132-142]
R, Magesh Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
R, TAMILARASI Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
S
S, RAJESH Preparation and Characterization of Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)–Aluminum Nitride (AlN) Nanocomposite for the Fabrication of Piezoelectric Nanogenerators [Volume 58, Issue 2, 2025, Pages 208-218]
Saboori, Abdollah Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
Sarkari Khorrami, Mahmoud The effect of FeCoCrCuAl0.2 high-entropy alloy interlayer on dissimilar resistance spot welding of AISI304 to AISI420 stainless steels [Volume 58, Issue 2, 2025, Pages 277-286]
Sedaghat, Reza Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
Septani, Cindy MutiaraPorous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
Sharifian, Hanieh Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
T
Taghavinia, Nima Enhanced Stability of Perovskite Solar Cells through MACl-Induced Crystallinity Improvement and Suppression of Ion Migration [Volume 58, Issue 2, 2025, Pages 219-227]
Taghavinia, Nima Effect of hydrogen peroxide on crystalline orientation and optoelectrical properties of aluminum-doped zinc oxide prepared by chemical bath deposition [Volume 58, Issue 2, 2025, Pages 255-263]
Taghiabadi, Reza Ultrasonic surface severe plastic deformation of selective laser melted metal parts- A review [Volume 58, Issue 2, 2025, Pages 161-196]
Talebi, Mohammad Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
Z
Zebarjad, Seyed Mojtaba -The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
Zeinali, Khadijeh Cytocompatibility of a 3- Dimensional Graphene Oxide/ Laminin Composite Scaffold Intended for Nerve Tissue Engineering [Volume 58, Issue 2, 2025, Pages 264-276]
