Journal of Ultrafine Grained and Nanostructured Materials

Journal of Ultrafine Grained and Nanostructured Materials

Keyword Index
A
  • Accumulative roll bonding (ARB) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Adsorption Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Aluminum matrix composites (AMCs) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Amine modification Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Anode Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Anodization Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Anodizing Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Antibacterial Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Artificial Neural Network Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Artificial Neural Network Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Austenite Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
B
  • Ball milling Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Band Gap Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • BaTiO3 Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Bone Tissue Engineering Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
C
  • Carbon Nanotube Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene [Volume 51, Issue 1, 2018, Pages 60-70]
  • Carbon Nanotube Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Cathode Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • CaTiO3 Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Celestite ore Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • CO2/CH4 separation Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Co-electrodeposition Fabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties [Volume 51, Issue 2, 2018, Pages 193-200]
  • Continuous Dynamic Recrystallization Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Copper Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Coprecipitation Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Cu-Cr-Zr nanocomposite Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
D
  • Deformation texture EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Dip coating Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Discharge Capacity Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
E
  • Electrical resistivity Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Electro Catalyst Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Electrochemical Synthesis Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Electrode Porosity Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Electron backscatter diffraction (EBSD) EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
F
  • Fe3O4 Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Ferrite Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Finemet Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Fuel Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Fuzzy inference system Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
G
  • Grain refinement Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
H
  • Hot rolling Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Hydrolysis rate Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
I
  • Infiltration Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • In situ composite Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
L
  • La2NiO4 Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Lithium ion batteries Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Lithium-Ion Battery Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Low carbon steel Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • LSM Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
M
  • Magnetic properties Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Magnetic properties Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Mechanical milling Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Mechanical properties Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Mechanical properties EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Mechanism Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Mechanochemical Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Micro hardness optimization Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Microstructure Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Microstructure characterization EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Mn0.8Zn0.2Fe2O4 Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • MnCo2O4 Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Mo-Cu/Al2O3 Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Mo-Cu alloy Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
N
  • Nano-composite Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Nanocomposite Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Nanocomposites ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Nano-crystalline Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Nano particles Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Nano-structured Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
P
  • Performance Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Photocatalysts ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Photocatalytic Activity Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Piezoelectric Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Porous Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Porous Oxide Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Process Parameters, Sol-Gel Methods Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
R
S
  • Scaffold 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Shear Texture Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Silica Particle Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Simulated Annealing Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • SiO2 Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Sol-gel Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Sol-gel Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Solid Oxide Cell Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Solid-state ion exchange ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Solution Combustion Synthesis Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Solvent Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Stainless Steels Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Strain hardening rate Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Strontium carbonate Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Surface morphology Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
T
  • Tensile properties Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • TiO2 Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Transition Metal Oxide Anode Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
Y
  • Y-Type Zeolite Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
Z
  • ZnO/bentonite ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]