Abasalizadeh, S. Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
Abdizadeh, Hossein Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
Abdizadeh, Hossein 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
Abedini, Mohammad Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
Aghvami Panah, Mohammad Hassan Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
Ahmadian, Zahra The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
Akhlaghi, Farshad The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
Alabid, khalil IbrahimReduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
Allahkaram, Saeed Reza Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
Arab Pour Yazdi, Mohammad Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
Arbuz, Alexandr Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
Asadi Asadabad, Mohsen Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
Aubry, Eric Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
Azad, Mohammadi JavadThe effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
Azizi Amirabad, Amirhosein Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
B
Bagherzadeh, Elham Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
Bakhtiarnia, Siavash Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
Bayat, Saeed Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
Billard, Alain Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
C
Chaharmahali, Razieh Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
Ebrahimi, Ramin Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
Enayati, Mohammad Hossein Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
Esbolat, Aibol Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
F
Fatoalh, Maryam Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
Fatolah, Parham Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
Fattah-alhosseini, Arash Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
Fattahi, Hasan Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
G
Ghaffarian, Seyed Reza Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
Gholampour, Mahdi Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
Golobostanfard, Mohammad Reza 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
Golobostanfard, M. R. Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
Gostariani, Reza Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
H
Hosseini, Seied Ali Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
Jafari Shabazi, Saeedeh Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
Jalali, Nargol Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
K
Karami, Zeynodin Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
Kashef, Mahshad Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
Kazemi, S. Marziyeh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
Khayati, Gholam RezaHybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
Khodadadi, Abbas-Ali The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
Krupenkin, Ivan Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
L
Lezhnev, Sergey Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
M
Maleh, Hassan KarimiReduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
Meftahi, Amin Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
Moghanian, Amirhossein Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
Mohammadi, Somayeh The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
Mortazavi, Yadollah The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
Mosleh-Shirazi, Sareh The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
Naizabekov, Abdrakhman Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
Nami, Mohammad Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
Nami, Navabeh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
Nasiri, Hadi Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
Nazari, Mohammad Mahdi Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
O
Olamaee, Ali Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
P
Panin, Evgeniy Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
R
Rahi, Abbas Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
Rakhsha, Amirhossein Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
Rashchi, Fereshteh Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
Rezaei, Zahra 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
S
Saghafi Yazdi, Morteza Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
Shahtahmassebi, Nasser Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
Sheibani, Saeed Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
Stolyarov, Vladimir VladimirovichStructure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
Sun, Hui Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
T
Teymuri Sangari, Mohammad Mahdi Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
V
Vahdati Khaki, Jalil Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
Volokitin, Andrey Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
Volokitina, Irina Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
Y
Yahyazadeh, Asieh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
Yerzhanov, Almas Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
