Author Index

A

  • Amini, Saeid Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Anjabin, Nozar Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Ashouri Sharafshadeh, Sina Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Ataie, Abolghasem The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Azargoon, Artin Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]

B

  • Babaei, Alireza The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]

D

  • Dehno Khalaji, Aliakbar Hydrothermal synthesized α-Fe2O3/Mn2O3 nanocomposite for efficient photodegradation of methylene blue under visible light [Volume 58, Issue 1, 2025, Pages 120-131]

E

  • Ebrahimi, Ramin Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Erfan, Mohammad Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]

F

  • Farzad, Hamed Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]

H

  • Habibi Parsa, Mohammad Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Hosseini Faregh, SaraSadat An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Hudha, Mohammad Istnaeny Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]

J

  • Jafari, Robabeh Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]

K

  • Kaykha, Mohammad Mehdi An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]
  • Kheiri, Mohammad Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Khosravi, Morteza An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]

M

  • Maali, Mona The Impact of Mechanical Activation on Nb Dopped LiNi0.8Co0.1Mn0.1O2 Cathode Materials [Volume 58, Issue 1, 2025, Pages 86-94]
  • Mazaheri, Yousef Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Mehdinavaz Aghdam, Rouhollah Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]
  • Minah, Faidliyah Nilna Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]
  • Miresmaeili, Reza Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Mirzadeh, Hamed Manufacturing of fine-grained AZ80 surface composites by friction stir processing: A review [Volume 58, Issue 1, 2025, Pages 33-44]
  • Mirzadeh, Hamed Investigating the effects of influential parameters on the process window during planetary rolling of the pure copper tube using simple rollers [Volume 58, Issue 1, 2025, Pages 55-66]
  • Mohammadi, Ali The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]
  • Mohammadzadeh, Hurieh Improved corrosion and wear protection performance of St12 steel by Ni-Cr-Al oxide coating [Volume 58, Issue 1, 2025, Pages 108-119]

N

  • Nemati, Rahim Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Niroumand, Behzad Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]

O

  • Oukati Sadeq, Fereydon An investigation of the microstructural and magnetic properties of low carbon steel processed through modified constrained studded pressing [Volume 58, Issue 1, 2025, Pages 78-85]

P

  • Pirhadi Tavandashti, Yalda Fabrication of Amniotic Membrane coated Silk Fibroin nanofibers Containing Thymol for Antibacterial Wound Dressing [Volume 58, Issue 1, 2025, Pages 1-14]

S

  • Saboori, Abdollah Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]
  • Saghafi Yazdi, Morteza Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Sedaghat, Reza Effect of heat treatment on anisotropic mechanical properties of 316L stainless steel produced via laser-based powder bed fusion [Volume 58, Issue 1, 2025, Pages 95-107]
  • Septani, Cindy Mutiara Porous Carbon Grain from Coconut Shell Biochar for Permeable Composite Paver [Volume 58, Issue 1, 2025, Pages 25-32]

T

  • Taghiabadi, Reza Corrosion behavior of ultrasonic impact treated Haynes 25 superalloy [Volume 58, Issue 1, 2025, Pages 67-77]
  • Talebi, Mohammad Effect of In-Situ Alloying with Si on the Microstructure of a Novel Ti-5Cu Alloy Manufactured by Laser Powder Bed Fusion [Volume 58, Issue 1, 2025, Pages 45-54]

Z

  • Zebarjad, Seyed Mojtaba - The tensile and thermal behavior of polyethylene/silica nanocomposites for high temperature applications produced via injection molding [Volume 58, Issue 1, 2025, Pages 15-24]