Keyword Index

A

  • Analcime Zeolite Membrane Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Anode electrode An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Aqueous Sol-gel The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • ATRP A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • AZ91 cast alloy Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]

B

  • Biocompatibility Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Biomedical Applications A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]

C

  • Calcium Phosphate Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Capacity An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Cation distribution Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Chitosan Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Circular Simple Shear Extrusion Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • CNT An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • CNTs Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Coating Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Cobalt Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Cobalt ferrite Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • COD Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Co-electrodeposition Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Congo-Red dye Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Copper ferrite Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Cordierite Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Corrosion Resistance A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Corrosion Resistance Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]

D

  • Doping Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Duty cycle Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]

E

  • Electro-chemical test Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Electrodeposition Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Extrusion Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]

F

  • Fatigue strength Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Finite element Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Finite Element Analysis Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Functionally graded coating Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]

G

  • Grain refinement Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Grain refinement Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Graphene oxide Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]

H

  • H2O2-decomposition Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Hall-Petch law Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Heat treatment A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Hydrogen evolution reaction Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Hydrostatic Cyclic Expansion-Extrusion Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Hydroxyapatite A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Hydroxyapatite Nanoparticles A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]

I

  • Implants A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Ion Exchange Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

K

  • Keywords: Synthesis The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Kojic acid A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]

L

  • Li2O- doping Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Li ion battery An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Lithium-Ion Battery Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]

M

  • Magnesium Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Magnesium The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Magnetic properties Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Mechanical milling Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Mechanical milling Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Mechanical properties A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Mechanical properties Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Mechanical properties New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Meso-porous The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Mesoporous Silicon Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Microstructure Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Microwave A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Modification Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

N

  • Nanocomposite Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Nano-photocatalyst Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Nanostructured Multilayers A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Natural bones A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Ni-Mo alloy Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Nitrogen doping An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Nonograins Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]

O

  • Orthorhombic Structure Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

P

  • Pervaporation Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Polystyrene A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Powder metallurgy Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Pulsed current densities Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]

R

  • Recrystallization Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Recrystallization The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Remazole-Red dye Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Rice Husk Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Rietveld refining Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Rutile Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]

S

  • Severe Plastic Deformation Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Severe Plastic Deformation Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • SHS Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Silica Nanoparticles Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Sol-gel Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Sol-gel auto-combustion Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Structural steel Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]

T

  • Tensile properties Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Texture Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Texture The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • TiO2 Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • TiO2 Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Twinning The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]

V

  • Visible light degradation Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]

W

  • W-H analysis Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]

Y

  • YAG The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]