Abdolahi Sereshki, Mohammad Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
Aghazadeh, Mustafa Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method [Volume 49, Issue 2, 2016, Pages 80-86]
Aivazi, Moluk Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
Ajori, Shahram Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
Amiri Talischi, Lima Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
Anbia, Mansoor Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
Anbia, Mansoor Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
Ansari, Reza Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
Ataie, Abolghasem Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
Ataie, Abolghasem Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
Azad, Bahram Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
Azadeh, Maryam Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
Azarkish, Hassan Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
B
Babaei, Majideh Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
Basiri, Omid Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
Behnamghader, Aliasghar A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
Borhani, Ehsan Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
D
Dehghan, Roghaye Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
Dehno Khalaji, Aliakbar Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
Dolati, Abolghassem An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
E
Eslami, Abdoulmajid Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
F
Fanaei Sheikholeslami, Tahereh Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
Fathi, Mohammadhossein Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
Feizi, Nourollah Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
G
Ghorbani, Mohammad An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
H
Habibi, Mohammad Javad Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
Habibi Parsa, Mohammad Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
Haghsenas, Mojgan Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
Hashemibeni, Batoul Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
Hosseinzadeh, Mohsen Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
K
Karimzadeh, Fathallah Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
Keshavarz Haddadian, Fateme A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
Khajezade, Ali Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
Khosravi, Faezeh Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
L
Lari Baghal, Seyyed Mohammad A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
M
Malakpour, Sina Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
Masoudpanah, Seyed Morteza Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
Mirzadeh, Hamed Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
Mirzadeh, Hamed Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
Mohajeri, Soha An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
Montazeri-pour, Mehdi Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
Mortazavi, Vajihesadat Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
N
Nafar Dehsorkhi, Reihane Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
Nejatidanesh, Farahnaz Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
O
Ostadmahmoodi Do, Zahra Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
P
Paydar, Mohammad Hosein A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
R
Rabiee, Mina Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
Raygan, Shahram Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
Reihanian, Mohsen A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
S
Sabooni, Soheil Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
Sadeghian, Behzad Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
Samadi, Ahad Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
Seyyed Ebrahimi, Seyyed Ali Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
Shahsavani, Ensieh Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
Sharifi, Ibrahim A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
Z
Zakeri, Mahnaz Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
Zamani, Cyrus Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
Zamanian, Ali A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
