Abootalebi, Mohammadreza Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
Afsharnaderi, Aria Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
Agbolaghi, Samira Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
Alemi, Abdolali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
Anbia, Mansoor Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
Ansari, Fahimeh Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
Anvari, Seyedeh Zahra Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
Asgari, Mohsen Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
Ataie, Abolghasem Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
B
Babaei, Alireza Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
Beygi-Khosrowshahi, Younes Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
C
Caudillo-Flores, Uriel Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
Chu, Aimin Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
D
Daneshvar, Hamed Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
E
Emamy, Masoud Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
Emamy, Massud Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
Enayati, Mohammad Hossein Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
Etminanfar, Mohamadreza Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
F
Faraji, Ghader Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
Fatemi, Seyed Mahmood Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
Fathyunes, Leila The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
Fernández-García, Marcos Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
G
Ghasemi, samad Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
Gheiratmand, Tayebeh Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
Guo, Shibo Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
H
Haddadnezhad, MohammadNavid Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
Hadi, Sina Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
Hadian, Ali Mohammad Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
Hadian, Amir Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
Heidarpour, Akbar Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
Honarpisheh, Mohammad Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
Hoshyar, Reyhane Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
Hoshyar, Reyhane Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
Hosseini, Seyyed Mahdi Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
K
Karimzadeh, Fathallah Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
Khalil-Allafi, Jafar Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
Khalil-Allafi, Jafar Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
Khalili, Vida Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
Khanizadeh, Leila Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
Khayati, Gholam RezaPreparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
Khayati, Gholam Reza Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
Khodaei, Mehdi Toward hydrophobicity without surface functionalization through organosilane sol gel coatings on nano-roughed aluminum substrate [Volume 53, Issue 2, 2020, Pages 117-126]
Koohsaryan, Esmat Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
L
Lotfpour, Mehrab Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
M
Madaah Hoseini, Hamid Reza Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
Maghsoodlu, Mohammad Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
Malekan, Mehdi Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
Mansouri, Hadi Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
Massoumi, Bakhshali Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
Mirzadeh, Hamed Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
Mohseni, Farzin Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
Molaei, Mohammad Jafar Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
Mollaei, Nafiseh Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
Mostafapour, Meysam Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
N
Naghizadeh, Meysam Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
Nasseri, Shahab Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
Nuriev, Ali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
P
Paydar, Mohammad HosseinInvestigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
Pourbahari, Bita Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
R
Rafi, ud-din Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
Razavi, Hossein Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
Safavi, Mir Saman Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
Sarvari, Raana Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
Sattari, Roshana Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
Shabani, Mahsa Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
Shadmani, Sepehr Toward hydrophobicity without surface functionalization through organosilane sol gel coatings on nano-roughed aluminum substrate [Volume 53, Issue 2, 2020, Pages 117-126]
Shafaei, Amineh Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
Sheibani, Saeed Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
Sheykholeslami, Seyed Omid Reza Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
Sheykholeslami, Seyed Omid Reza The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
Shokrollahi, Hooman Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
Sohrabi, Mohammad Javad Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
T
Tian, Li Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
Xu, Hongmei Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
Y
Yaqubov, Ali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
Z
Zamani, Cyrus Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
Zhang, Huajian Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
Zhao, Yuping Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
