Author Index

A

  • Abedi, Amir The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Abedi, Touraj Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Agbolaghi, Samira Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Agbolaghi, Samira A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Ahadi, Sina Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Anbia, Mansoor Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Askaran, Mohammadreza Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Ataie, Abolghasem Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Azarniya, Abolfazl New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]

B

  • Badawy, Abdelrahman Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Bahrami, Mostafa Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]

D

  • Dehghanian, Changiz Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]

E

  • Ebrahimi, Ramin Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Ebrahimian Pirbazari, Azadeh Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • ElHarby, Nouf Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Emamy, Massoud Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Etminanfar, Mohamadreza A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Etminanfar, Mohammadreza Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]

F

  • Fakhari, Behnam Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Faraji, Ghader Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Farajollahi, Maryam A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Farshbaf Ahmadipour, Mohammad New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Fatemi, Seyed Mahmood Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Fatemi, Seyed Mahmood The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Fathyunes, Leila Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Fayazzadeh, Saba Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]

G

  • Ghanbari Rad, Farkhonde A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]

H

  • Hakimpour, Farahman Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Hosseini, Seyed Mahmoud An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]

I

  • Ibrahim, Shimaa Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]

J

  • Jenabali Jahromi, S.A. Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]

K

  • Kafili, G. The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]
  • Kazemi Asl, Ali Akbar The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Khameneh Asl, Shahin Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Khayati, Gholam Reza Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Khayati, Gholam Reza A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Khodaee, Ziba Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Khodaei, Mehdi Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]

L

  • Lotfpour, Mehrab Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]

M

  • Malekan, Mehdi Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Mansourpanah, Yaghoub Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Marashi-Najafi, Fatemeh Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Mashayekhi, Alireza An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Milani, M. The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]
  • Mirzadeh, Hamed Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Moalej, Nikta S. Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Mohajerani, Seyed Sepehr Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Mokhtarzadeh, Shafagh Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Monazzam, Pejman Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Mousavi, Atieyeh Alsadate Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]

N

  • Naderi, Elmira A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]

R

  • Reddy, Mogalahalli Venkatesh New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Rezvani, Alireza Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]

S

  • Safavi, Mir Saman A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Safavi, Mir Saman New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Safiabadi Tali, Seyed Ali An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Saghafi Yazdi, Morteza Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Salarvand, Vahid Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Samadpour, Farshad Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Sanaee, Zeinab An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Saraei, Mahnaz A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Sepehrian, Mohammad Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Sheibani, Saeed Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Siahsarani, Armin Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Sobhani, Manoochehr The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Soleimani, Maryam Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]

T

  • Talafi Noghani, Mohammad Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Tavakoli, Hossein The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]

V

  • Vaghari, Majid Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]

Z

  • Zamani, Cyrus Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]