A
-
Abasalizadeh, S.
Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
-
Abdizadeh, Hossein
Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
-
Abdizadeh, Hossein
1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
-
Abedini, Mohammad
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
-
Aghvami Panah, Mohammad Hassan
Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
-
Ahmadian, Zahra
The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
-
Ahmadi Dermeni, Hossein
Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
-
Akhlaghi, Farshad
The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
-
Alabid, khalil Ibrahim
Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
-
Alamolhoda, Somaye
Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
-
Alibakhshi, Somayeh
Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
-
Aliramezani, Reihane
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
-
Allahkaram, Saeed Reza
Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
-
Arab Pour Yazdi, Mohammad
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
-
Arbuz, Alexandr
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
-
Asadi Asadabad, Mohsen
Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
-
Aubry, Eric
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
-
Azad, Mohammadi Javad
The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
-
Azizi Amirabad, Amirhosein
Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
B
-
Bagherzadeh, Elham
Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
-
Bakhtiarnia, Siavash
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
-
Bayat, Saeed
Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
-
Billard, Alain
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
C
-
Chaharmahali, Razieh
Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
D
-
Dastanpour, Esmat
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
E
-
Ebrahimi, Ramin
Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
-
Enayati, Mohammad Hossein
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
-
Esbolat, Aibol
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
F
-
Fatoalh, Maryam
Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
-
Fatolah, Parham
Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
-
Fattah-alhosseini, Arash
Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
-
Fattahi, Hasan
Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
G
-
Ghaffarian, Seyed Reza
Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
-
Gholampour, Mahdi
Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
-
Ghorbanian, Saleh
Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
-
Golobostanfard, Mohammad Reza
1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
-
Golobostanfard, M. R.
Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
-
Gostariani, Reza
Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
H
-
Hosseini, Seied Ali
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
I
-
Imani, Moein
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
J
-
Jafari Shabazi, Saeedeh
Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
-
Jalali, Nargol
Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
K
-
Karami, Zeynodin
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
-
Kashef, Mahshad
Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
-
Kazemi, S. Marziyeh
Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
-
Khayati, Gholam Reza
Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
-
Khodadadi, Abbas-Ali
The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
-
Krupenkin, Ivan
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
L
-
Lezhnev, Sergey
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
M
-
Maleh, Hassan Karimi
Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
-
Meftahi, Amin
Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
-
Moghanian, Amirhossein
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
-
Mohammadi, Somayeh
The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
-
Momeni Heravi, Mohammad Ehsan
Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
-
Mortazavi, Yadollah
The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
-
Mosleh-Shirazi, Sareh
The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
-
Msoudpanah, Seyyed Morteza
Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
N
-
Naizabekov, Abdrakhman
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
-
Nami, Mohammad
Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
-
Nami, Navabeh
Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
-
Nasiri, Hadi
Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
-
Nazari, Mohammad Mahdi
Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
O
-
Olamaee, Ali
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
P
-
Panin, Evgeniy
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
R
-
Rahi, Abbas
Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
-
Rakhsha, Amirhossein
Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
-
Rashchi, Fereshteh
Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
-
Rezaei, Zahra
1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
S
-
Saghafi Yazdi, Morteza
Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
-
Sarmadi, Amin
Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
-
Shahtahmassebi, Nasser
Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
-
Sheibani, Saeed
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
-
Stolyarov, Vladimir Vladimirovich
Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
-
Sun, Hui
Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
T
-
Teymuri Sangari, Mohammad Mahdi
Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
V
-
Vahdati Khaki, Jalil
Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
-
Volokitin, Andrey
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
-
Volokitina, Irina
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
Y
-
Yahyazadeh, Asieh
Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
-
Yerzhanov, Almas
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
-
Yousefi-Zavieh, Hamidreza
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
Z
-
Zamani, Cyrus
Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
-
Zebarjad, Seyed Mojtaba -
Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
Your query does not match with any item