Author Index

A

  • Aali Majidabad, Milad Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Abasalizadeh, S. Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
  • Abbaspoor, Saleheh Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Abbaspoor, Saleheh Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene [Volume 51, Issue 1, 2018, Pages 60-70]
  • Abdi, Ata Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Abdinia, Robabeh Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Abdizadeh, Hossein Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Abdizadeh, Hossein 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Abdolahi Sereshki, Mohammad Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Abdollahi, Alireza A Tri-modal 2024 Al -B4C composites with super-high strength and ductility: Effect of coarse-grained aluminum fraction on mechanical behavior [Volume 47, Issue 2, 2014, Pages 77-88]
  • Abdolvand, Hooman Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Abedi, Amir The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Abedi, Touraj Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Abedini, Mohammad Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Abolhasani, Ali Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Abootalebi, Mohammadreza Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Aboutalebi, M. R. Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Afsharnaderi, Aria Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Agbolaghi, Samira Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Agbolaghi, Samira Nano-Hybrids Based on Surface Modified Reduced Graphene Oxide Nanosheets and Carbon Nanotubes and a Regioregular Polythiophene [Volume 51, Issue 1, 2018, Pages 60-70]
  • Agbolaghi, Samira 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Agbolaghi, Samira Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Agbolaghi, Samira A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Agbolaghi, Samira Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Agbolaghi, Samira Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Aghazadeh, Mustafa Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method [Volume 49, Issue 2, 2016, Pages 80-86]
  • Aghvami Panah, Mohammad Hassan Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Ahadi, Sina Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Ahmad, Waseem Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • Ahmadbeigi, Naser The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Ahmadi, Masoud Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Ahmadian, Zahra The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Ahmadi Dermeni, Hossein Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Ahmadi Dermeni, Hossein Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Ahmadi Khoei, Narges Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Aivazi, Moluk Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Ajori, Shahram Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Akbari, Zohreh Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Akhlaghi, Farshad Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Akhlaghi, Farshad The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Alabid, khalil Ibrahim Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
  • Alamolhoda, Somaye Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Alamolhoda, Somaye Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Alemi, Abdolali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
  • Alibakhshi, Somayeh Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Alimohammadi, Erfan Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Aliofkhazraei, Mahmood Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Aliramezani, Reihane Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Alizadeh, Ali A Tri-modal 2024 Al -B4C composites with super-high strength and ductility: Effect of coarse-grained aluminum fraction on mechanical behavior [Volume 47, Issue 2, 2014, Pages 77-88]
  • Alizadeh, P. Processing and Characterization of Nanocrystalline Mica Glass-Ceramics [Volume 45, Issue 1, 2012, Pages 53-56]
  • Allahkaram, Saeed Reza Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]
  • Allahverdi, Ali Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant [Volume 47, Issue 2, 2014, Pages 105-112]
  • Amadeh, Ahmadali Synthesis and Characterization of ZnO Nanostructures Grown via a Novel Atmospheric Pressure Solution Evaporation Method [Volume 48, Issue 2, 2015, Pages 85-91]
  • Amiri Talischi, Lima Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • Anabestani, Hossein Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Anbia, Mansoor Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Anbia, Mansoor Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Anbia, Mansoor Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Anbia, Mansoor Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Anbia, Mansoor Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Ansari, Fahimeh Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Ansari, Reza Exact solution for the vibrations of cylindrical nanoshells considering surface energy effect [Volume 48, Issue 2, 2015, Pages 113-124]
  • Ansari, Reza Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Ansari, Reza Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Ansari, Reza Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Anvari, Sayede Razieh The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Anvari, Seyedeh Zahra Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Arabi, H. Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Arab Pour Yazdi, Mohammad Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Arbuz, Alexandr Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Asadi, Najmeh Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Asadi Asadabad, Mohsen Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Asgari, Masoud Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Asgari, Mohsen Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
  • Asghari Shivaee, Hossein Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Ashrafizadeh, Fakhreddin Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Askaran, Mohammadreza Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Ataei, Abolghasem Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • Ataei, Abolghasem Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Ataie, Abolghasem Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Ataie, Abolghasem Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Ataie, Abolghasem Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method [Volume 48, Issue 1, 2015, Pages 45-52]
  • Ataie, Abolghasem A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route [Volume 48, Issue 2, 2015, Pages 59-67]
  • Ataie, Abolghasem Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Ataie, Abolghasem Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Ataie, Abolghasem Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Ataie, Abolghasem Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Ataie, Abolghasem Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Ataie, Abolghasem Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Ataie, Abolghasem Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Ataie, Abolghasem Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Atazadegaan, R. The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • Aubry, Eric Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Azad, Bahram Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Azad, Mohammadi Javad The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Azadeh, Maryam Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Azadi, Farzaneh Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Azari Khosroshahi, Rasoul Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Azari Khosroshahi, Rasoul Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Azarkish, Hassan Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
  • Azarniya, Abolfazl New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Azizi-Alizamini, Hamid Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Azizi Amirabad, Amirhosein Electrochemical Behavior Of Nanostructured Bioglass®/Alginate Composite Coating On Magnesium Alloy By Electrophoretic Deposition For Orthopedic Application [Volume 55, Issue 1, 2022, Pages 49-57]

B

  • Babaei, Alireza Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method [Volume 48, Issue 1, 2015, Pages 45-52]
  • Babaei, Alireza Effective enhancement of electrochemical properties of LSM oxygen electrode in SOCs by LNO nano-catalyst infiltration [Volume 51, Issue 1, 2018, Pages 53-59]
  • Babaei, Alireza Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Babaei, Alireza Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Babaei, Majideh Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Badawy, Abdelrahman Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Bagherzadeh, Elham Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Bahadori, Ali 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Bahrami, Mostafa Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Bahrololoom, Mohammad Ebrahim Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Bakhtiarnia, Siavash Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Balavar, Mohsen Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Banaei, Majideh Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Banimostafa Arab, Nasrollah Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Barzegar Vishlaghi, Mahsa Role of Intensive Milling on Microstructural and Physical Properties of Cu80Fe20/10CNT Nano-Composite [Volume 47, Issue 1, 2014, Pages 37-42]
  • Barzegar Vishlaghi, Mahsa Characterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route [Volume 47, Issue 2, 2014, Pages 57-61]
  • Basiri, Omid Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Bayat, Saeed Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Bayat Tork, Hossein Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Behnamghader, Aliasghar A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Beigdelou, Rasoul Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Bernoosi, Samaneh Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Beygi-Khosrowshahi, Younes 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Beygi-Khosrowshahi, Younes Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Billard, Alain Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Biswas, Pushpa Study of the Single Step Green Synthesis of MgO Nanoparticles Using Peanut Shell Extract for the Evaluation of in Vitro Antibacterial and Photocatalytic Properties [Volume 56, Issue 1, 2023, Pages 75-83]
  • Borhani, Ehsan Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Borhani, Ehsan The effect of temperature and strain rate on elongation to failure in nanostructured Al-0.2wt% Zr alloy fabricated by ARB process [Volume 48, Issue 2, 2015, Pages 125-132]
  • Borhani, Ehsan Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process [Volume 49, Issue 1, 2016, Pages 22-28]
  • Borhani, Ehsan EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Borhani, Ehsan Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Bostani, Behrooz Fabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties [Volume 51, Issue 2, 2018, Pages 193-200]
  • Bounnah, Younes Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]

C

  • Cabrera, Jose-Maria Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Caudillo-Flores, Uriel Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Chaharmahali, Razieh Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Chaharmahali, Razieh Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
  • Charan Sangem, Vishnu Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Chitsazzadeh, M. Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Chitsazzadeh, M. A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Chu, Aimin Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]

D

  • Dadashi, Milad Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Daneshvar, A. A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Daneshvar, Hamed Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Darvizeh, Mansour Exact solution for the vibrations of cylindrical nanoshells considering surface energy effect [Volume 48, Issue 2, 2015, Pages 113-124]
  • Darvizeh, Mansour Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Darvizeh, Mansour Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Daryoush, Sara Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Das, Debasis Preparation of CuO nanoparticles by thermal decomposition of double-helical dinuclear copper(II) Schiff-base complexes [Volume 48, Issue 2, 2015, Pages 93-99]
  • Dastanpour, Esmat Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Deflorian, Flavio Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Dehestani, Mahboubeh Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Dehghan, Roghaye Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Dehghanian, Changiz Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • Dehghanian, Changiz Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Dehno Khalaji, Aliakbar Nickel Oxide (NiO) nanoparticles prepared by solid-state thermal decomposition of Nickel (II) schiff base precursor [Volume 48, Issue 1, 2015, Pages 1-4]
  • Dehno Khalaji, Aliakbar Preparation of CuO nanoparticles by thermal decomposition of double-helical dinuclear copper(II) Schiff-base complexes [Volume 48, Issue 2, 2015, Pages 93-99]
  • Dehno Khalaji, Aliakbar Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Dolati, Abolghassem An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Dolati, Shokoofeh Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Dorri, Mehrdad Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]

E

  • Ebied, Saad Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Ebrahimi, Ramin Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Ebrahimi, Ramin Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Ebrahimi, Ramin Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Ebrahimian Pirbazari, Azadeh Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Ebrahimzad, Akbar Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • Eivani, Ali Reza Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Eivani, Ali Reza Effects of annealing treatment on microstructure, tensile properties and electrical conductivity of copper-graphene nanocomposite fabricated by accumulative roll bonding [Volume 56, Issue 2, 2023, Pages 194-204]
  • El-Bitar, Taher Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • ElHarby, Nouf Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • ElMeligy, Maha Creation of extremely fine lath martensite combined with nano needle like structured carbides in ultra high strength (UHS) military Steel [Volume 56, Issue 2, 2023, Pages 173-183]
  • Emami, Sajad Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Emamy, Masoud Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
  • Emamy, Massoud Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Emamy, Massoud Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Emamy, Massoud Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Emamy, Massud Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Enayati, Mohammad Hossein Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Enayati, Mohammad Hossein Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Enayati, Mohammad Hossein The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Esbolat, Aibol Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Esfahani, Hamid Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Eslami, Abdoulmajid Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Etminanfar, Mohamadreza Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • Etminanfar, Mohamadreza A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Etminanfar, Mohamadreza Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Etminanfar, Mohammadreza Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]

F

  • Fakhari, Behnam Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Fanaei Sheikholeslami, Tahereh Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]
  • Farahmandjou, Majid Synthesis of nano-sized ceria (CeO2) particles via a cerium hydroxy carbonate precursor and the effect of reaction temperature on particle morphology [Volume 48, Issue 1, 2015, Pages 5-10]
  • Faraji, Ghader Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Faraji, Ghader Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Faraji, Ghader Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Faraji, Ghader Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Farajollahi, Maryam A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Farhadi, Seyed Saeed Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Farshbaf Ahmadipour, Mohammad New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Fatemi, Mahmood Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures [Volume 48, Issue 2, 2015, Pages 69-83]
  • Fatemi, Seyed Mahmood Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Fatemi, Seyed Mahmood Recrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy [Volume 52, Issue 1, 2019, Pages 18-24]
  • Fatemi, Seyed Mahmood The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Fatemi, Seyed Mahmood Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Fatemi, S.M. Evolution of texture in an ultrafine and nano grained magnesium alloy [Volume 48, Issue 1, 2015, Pages 11-16]
  • Fatemi-Varzaneh, S.M. Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Fathi, Mohammad Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Fathi, Mohammadhossein Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Fathollahzadeh, Vida Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • Fathyunes, Leila Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Fathyunes, Leila The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Fatoalh, Maryam Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Fatolah, Parham Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Fattah-alhosseini, Arash Plasma electrolyte oxidation of hydroxyapatite-containing coating on AZ31B Mg alloy: Effects of current density and duty cycle [Volume 54, Issue 2, 2021, Pages 149-162]
  • Fattah-alhosseini, Arash Effect of coating frequency on the corrosion performance of PEO coatings on AZ31B Mg alloy produced in an electrolyte containing hydroxyapatite nanoparticles [Volume 55, Issue 1, 2022, Pages 1-9]
  • Fattah-alhosseini, Arash Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]
  • Fattahi, Hasan Epoxy/ PVC/ Nanosilica Hybrid Coating as an Organic Coating with Enhanced Thermal Stability and Wear Resistance [Volume 55, Issue 2, 2022, Pages 186-193]
  • Fayazzadeh, Saba Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Fazli, Rahman Low temperature synthesis of CaZrO3 nanoceramics from CaCl2–NaCl molten eutectic salt [Volume 48, Issue 1, 2015, Pages 17-25]
  • Feizi, Atabak ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Feizi, Nourollah Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Fereidoon, A. Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Fereidoon, Abdolhosein Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Fernández-García, Marcos Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]

G

  • Ghaffarian, Seyed Reza Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Ghanbari Rad, Farkhonde A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Ghannad, Reza Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Ghasemi, samad Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Ghazanfari, Mahdi Synthesis and characterization of Fe3O4@Ag core-shell: structural, morphological, and magnetic properties [Volume 47, Issue 2, 2014, Pages 97-103]
  • Gheiratmand, Tayebeh Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Gheiratmand, Tayebeh Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Ghesmati Tabrizi, Saeid Investigation of in-situ synthesis of alumina reinforcement and comparative flexural behavior with respect to ex-situ Al2O3 reinforced copper composite [Volume 54, Issue 1, 2021, Pages 101-111]
  • Gholami Farashah, Mohammad Sadegh Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Gholamipour, Reza Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]
  • Gholampour, Mahdi Investigation of mechanical and EMI shielding performance of polypropylene/carbon nanotube/glass fiber microcellular foam [Volume 55, Issue 1, 2022, Pages 58-64]
  • Ghorbani, Faezeh Modifying TiO2 nanotube using N-doping and electrochemical reductive doping as a supercapacitor electrode [Volume 54, Issue 2, 2021, Pages 131-140]
  • Ghorbani, Mohammad An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Ghorbanian, Saleh Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Ghorbanpour, Mohammad Silver-Doped Nanoclay with Antibacterial Activity [Volume 50, Issue 2, 2017, Pages 124-131]
  • Ghorbanpour, Mohammad Antibacterial activity of porous anodized copper [Volume 51, Issue 1, 2018, Pages 84-89]
  • Ghorbanpour, Mohammad ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Golestani-Fard, Farhad Low temperature synthesis of CaZrO3 nanoceramics from CaCl2–NaCl molten eutectic salt [Volume 48, Issue 1, 2015, Pages 17-25]
  • Golmohammadi, Morteza Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Golobostanfard, Mohammad Reza 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Golobostanfard, M. R. Can the Spacer Cation Affect the Preferential Growth and Phase Segregation in 2D Ruddlesden-Popper Perovskites? [Volume 55, Issue 1, 2022, Pages 31-36]
  • Gorbani, Faezeh Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • Gostariani, Reza Effect of Al-BN Powder Preparation Method on Tensile Properties of Extruded bulk Nanocomposite [Volume 55, Issue 1, 2022, Pages 70-77]
  • Guo, Shibo Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]

H

  • Habibi, Mohammad Javad Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Habibi Parsa, Mohammad Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Habibi-Parsa, Mohammad Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties [Volume 48, Issue 1, 2015, Pages 53-58]
  • Hadavi, SeyedeHosna In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Haddadnezhad, MohammadNavid Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Haddad Sabzevar, Mohsen Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • Hadi, Sina Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Hadian, Ali Mohammad Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Hadian, Amir Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Haghighat-Shishavan, Safa Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Haghighi, Omid Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy [Volume 56, Issue 1, 2023, Pages 68-74]
  • Haghjoo, Roghayeh The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Haghsenas, Mojgan Stepwise Synthesis of Mesoporous Carbon Nitride Functionalized by Melamine Based Dendrimer Amines for Adsorption of CO2 and CH4 [Volume 49, Issue 2, 2016, Pages 64-71]
  • Hakimi, Bahareh ZnO/bentonite Nanocomposites Prepared with Solid-state Ion Exchange as Photocatalysts [Volume 51, Issue 2, 2018, Pages 139-146]
  • Hakimpour, Farahman Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Hamdam Momen, Mehdi Synthesis and Characterization of ZnO Nanostructures Grown via a Novel Atmospheric Pressure Solution Evaporation Method [Volume 48, Issue 2, 2015, Pages 85-91]
  • Hashemi, Babak The Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor [Volume 46, Issue 1, 2013, Pages 67-74]
  • Hashemibeni, Batoul Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Hasheminiasari, Masoud Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Hassani, S. S. Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Hassanzadeh Nemati, Nahid The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Heidarpour, Akbar Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Hemmatian, Hosein Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Heydarzadeh sohi, Mahmoud Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Heydarzadeh sohi, Mahmoud Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Heydarzadeh sohi, Mahmoud Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Heydarzadeh Sohi, Mahmoud Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Heydarzadeh Sohi, Mahmoud Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Heydarzadeh Sohi, Mahmoud Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Heydarzadeh Sohi, Mahmoud Synthesis and Characterization of ZnO Nanostructures Grown via a Novel Atmospheric Pressure Solution Evaporation Method [Volume 48, Issue 2, 2015, Pages 85-91]
  • Honarpisheh, Mohammad Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
  • Honarpisheh, Mohammad Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy [Volume 56, Issue 1, 2023, Pages 68-74]
  • Hooshyar, Mohammadreza Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Hoshyar, Reyhane Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Hoshyar, Reyhane Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Hosseini, M. G. Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Hosseini, Seied Ali Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Hosseini, Seyed Mahmoud An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Hosseini, Seyyed Mahdi Synthesis and consolidation of Ti2SC nano layer by spark plasma sintering and its wear behavior [Volume 53, Issue 2, 2020, Pages 110-116]
  • Hosseini Karimi, Seyed Nasir Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Hosseini-Zori, Maryam Particle size and kind of mica in synthesis of nontoxic bronze and gold pearlescent pigments based on nanoencapsulated hematite [Volume 48, Issue 2, 2015, Pages 101-112]
  • Hosseinzadeh, Mohsen Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • H. Sabzevar, Mohsen Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]

I

  • Ibrahim, Shimaa Improvement of Nanosized CuO-Fe2O3/cordierite System by Li2O-treatment for wastewater treatment [Volume 52, Issue 2, 2019, Pages 175-187]
  • Imani, Moein Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Izadpanah Mehrkish, Nahid Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]

J

  • Jafari, Vajihe Synthesis of nanosilica from silica fume using an acid-base precipitation technique and PVA as a nonionic surfactant [Volume 47, Issue 2, 2014, Pages 105-112]
  • Jafarian, Hamidreza Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process [Volume 47, Issue 1, 2014, Pages 1-7]
  • Jafarian, Hamidreza Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Jafarian, Hamid Reza Effects of annealing treatment on microstructure, tensile properties and electrical conductivity of copper-graphene nanocomposite fabricated by accumulative roll bonding [Volume 56, Issue 2, 2023, Pages 194-204]
  • Jafari Shabazi, Saeedeh Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Jalali, Nargol Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Jalili, Kiyumars Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • Jamili-Shirvan, Zahra Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons [Volume 46, Issue 1, 2013, Pages 55-59]
  • Janghorban, Kamal Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Javanshir, Shahrzad Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Jenabali Jahromi, S.A. Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Johar, Fatemeh Synthesis and characterization of Fe3O4@Ag core-shell: structural, morphological, and magnetic properties [Volume 47, Issue 2, 2014, Pages 97-103]

K

  • K A, Malini Review on Various Synthesis Methods of Bismuth Telluride Nanoparticles [Volume 54, Issue 2, 2021, Pages 211-218]
  • Kafili, G. The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]
  • Kakoo, Mahdiyeh Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Kalhor, Alireza Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Kamali Heidari, Elham Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Kamali Heidari, Elham Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Kamali-Heidari, Elham Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Kamjou, Ramin Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Kamyabi-Gol, ata Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Kamyabi-Gol, Ata Electrode Materials for Lithium Ion Batteries: A Review [Volume 51, Issue 1, 2018, Pages 1-12]
  • Karami, Zeynodin Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Karimzadeh, F. The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Karimzadeh, Fathallah Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Karimzadeh, Fathallah Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion [Volume 53, Issue 2, 2020, Pages 135-145]
  • Karimzadeh, Fathallah The Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Al6061-T6 Aluminium Alloy [Volume 56, Issue 1, 2023, Pages 11-20]
  • Kashani Bozorg, Farshid Nano-Crystalline Mg(2-x)MnxNi Compounds Synthesized by Mechanical Alloying: Microstructure and Electrochemistry [Volume 47, Issue 1, 2014, Pages 43-49]
  • Kashani-Bozorg, Seyed Farshid Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Kashef, Mahshad Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Kazemi, S. Marziyeh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Kazemi Asl, Ali Akbar The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy [Volume 52, Issue 2, 2019, Pages 142-148]
  • Kazemipour, Maryam Enhancement of CO2/CH4 Adsorptive Selectivity by Functionalized Nano Zeolite [Volume 51, Issue 2, 2018, Pages 174-182]
  • Kerid, Rachid Effects of structure design on electrostatic pull-in voltage of perforated nanoswitch with intermolecular surface forces [Volume 54, Issue 2, 2021, Pages 219-227]
  • Kermanpur, A. The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Keshavarz Haddadian, Fateme A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Keyhanvar, Peyman Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Keyvanara, Amir Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]
  • Keyvani, Ahmad Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Keyvani, Ahmad Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Khadivi Ayask, Heydar Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Khadivi Ayask, Heydar Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • Khajezade, Ali Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Khalil-Allafi, Jafar Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy [Volume 50, Issue 2, 2017, Pages 98-104]
  • Khalil-Allafi, Jafar Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Khalil-Allafi, Jafar Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Khalili, Vida Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Khameneh Asl, Sh. Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods [Volume 54, Issue 1, 2021, Pages 40-50]
  • Khameneh Asl, Shahin Gradual Change of Pulse Parameters as a New Strategy for Synthesis of Functionally Graded Ni-Cr Coatings [Volume 52, Issue 1, 2019, Pages 43-56]
  • Khameneh Asl, Shahin Modifying TiO2 nanotube using N-doping and electrochemical reductive doping as a supercapacitor electrode [Volume 54, Issue 2, 2021, Pages 131-140]
  • Khandani, S. T. Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • Khani, V. Processing and Characterization of Nanocrystalline Mica Glass-Ceramics [Volume 45, Issue 1, 2012, Pages 53-56]
  • Khanizadeh, Leila Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Kharratian Khameneh, Soheila Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films [Volume 47, Issue 1, 2014, Pages 51-56]
  • Khayati, Gholam Reza Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Khayati, Gholam Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Khayati, Gholam Reza Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Khayati, Gholam Reza Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Khayati, Gholam Reza Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Khayati, Gholam Reza Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Khayati, Gholam Reza Gene Expression Programming for Green Synthesis of Silver Nanoparticles: Size Evolution [Volume 54, Issue 2, 2021, Pages 180-191]
  • Khayati, Gholam Reza Hybrid Templating Approach for the Synthesis of Hierarchical Oxides: Titania Heterojunctions for Photodegradation of Organic Dyes [Volume 55, Issue 2, 2022, Pages 200-210]
  • Khayati, Gholam Reza A Novel Approach for Direct Preparation of Hydroxyapatite Nanoparticles from natural source using Microwave [Volume 52, Issue 1, 2019, Pages 110-121]
  • Khayati, Gholam Reza Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Khayyam Nekouei, Rasoul Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Khodabakhshzade Fallah, Maoud Investigation of in-situ synthesis of alumina reinforcement and comparative flexural behavior with respect to ex-situ Al2O3 reinforced copper composite [Volume 54, Issue 1, 2021, Pages 101-111]
  • Khodadadi, Abbas-Ali The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Khodaee, Ziba Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Khodaei, Mehdi Salt-assisted combustion synthesis of cobalt ferrite nanoparticles; magnetic properties and cation distribution measurement by XRD analysis [Volume 52, Issue 1, 2019, Pages 69-77]
  • Khodaei, Mehdi Toward hydrophobicity without surface functionalization through organosilane sol gel coatings on nano-roughed aluminum substrate [Volume 53, Issue 2, 2020, Pages 117-126]
  • Khodaei, Mehdi Effect of BaTiO3 nanoparticles contents on piezoelectric response of PVDF-BaTiO3 nanocomposite [Volume 56, Issue 2, 2023, Pages 157-164]
  • Khorsand, Hamid Synthesis of dual-phase face-centered cubic crystal structure in nanocrystalline AlCoCuFeNi high-entropy alloy [Volume 56, Issue 2, 2023, Pages 233-246]
  • Khosravi, Faezeh Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System [Volume 49, Issue 1, 2016, Pages 36-42]
  • Khosravi, Payam Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • Kim, Jang-Kyo Effect of processing parameters on the electrochemical performance of graphene/ nickel ferrite (G-NF) nanocomposite [Volume 48, Issue 1, 2015, Pages 27-35]
  • Koohestani, Nafiseh Optimizing the Stabilization Temperature of Electrospun PAN Fibers Used for Synthesis of Carbon Nanofibers [Volume 54, Issue 1, 2021, Pages 51-57]
  • Koohsaryan, Esmat Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Krupenkin, Ivan Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Kuzmin, Sergey Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]

L

  • Labbaf, Sheyda Sol-gel synthesis of (Ca-Ba)TiO3 nanoparticles for bone tissue engineering [Volume 51, Issue 1, 2018, Pages 77-83]
  • Lari Baghal, Seyyed Mohammad A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Lezhnev, Sergey Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Lotfiman, Samaneh Photocatalytic Decolorization of Methyl Orange by Silica-Supported TiO2 Composites [Volume 50, Issue 1, 2017, Pages 43-50]
  • Lotfpour, Mehrab Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Lotfpour, Mehrab Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]

M

  • Madaah Hoseini, Hamid Reza Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Madaah Hosseini, Hamid Reza Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes [Volume 51, Issue 2, 2018, Pages 96-100]
  • Madaah Hosseini, Hamid Reza Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Madaah Hosseini, Hamid Reza The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Madandar Motlagh, Mahdi Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Maddah, Mona Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Maghsoodlu, Mohammad Ultrafast synthesis of hierarchical zeolite FAU by microwave heating [Volume 53, Issue 2, 2020, Pages 127-134]
  • Mahboubi, Farzad Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Mahdavi jafari, Mehrdad Adaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm [Volume 51, Issue 1, 2018, Pages 43-52]
  • Mahdavi Jafari, Mehrdad Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Malakpour, Sina Characterization of Elastic Properties of Porous Graphene Using an Ab Initio Study [Volume 49, Issue 2, 2016, Pages 97-102]
  • Maleh, Hassan Karimi Reduction of Graphene Oxide by New Chemical and Green Methods [Volume 55, Issue 2, 2022, Pages 172-185]
  • Malekan, Ali Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Malekan, Mehdi Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions [Volume 52, Issue 2, 2019, Pages 218-228]
  • Malekan, Mehdi Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion [Volume 53, Issue 2, 2020, Pages 177-182]
  • Malekan, Mehdi Microstructure and mechanical properties in dissimilar friction stir welding of 316 stainless steel to 4140 steel [Volume 56, Issue 2, 2023, Pages 147-156]
  • Malek Khachatourian, Adrine Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Mansouri, Elahe Synthesis of dual-phase face-centered cubic crystal structure in nanocrystalline AlCoCuFeNi high-entropy alloy [Volume 56, Issue 2, 2023, Pages 233-246]
  • Mansouri, Hadi Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets [Volume 53, Issue 1, 2020, Pages 48-59]
  • Mansourpanah, Yaghoub Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Marashi, Pirooz Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Marashi-Najafi, Fatemeh Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility [Volume 52, Issue 1, 2019, Pages 57-68]
  • Mashayekhi, Alireza An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Masoudpanah, Seyed Morteza Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Masoudpanah, Seyyed Morteza Coprecipitation Synthesis of CoFe2O4 Nanoparticles for Hyperthermia [Volume 50, Issue 2, 2017, Pages 105-110]
  • Massoumi, Bakhshali 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Massoumi, Bakhshali Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Mazloumi, Maryam Silver-Doped Nanoclay with Antibacterial Activity [Volume 50, Issue 2, 2017, Pages 124-131]
  • Meftahi, Amin Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Mehdinavaz Aghdam, Rouhollah Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Mehdinavaz Aghdam, Rouhollah In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Mehdinavaz Aghdam, Rouhollah Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Milani, M. The effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering [Volume 52, Issue 2, 2019, Pages 154-163]
  • Militzer, Matthias Ultra-Fine Grained Dual-Phase Steels [Volume 45, Issue 1, 2012, Pages 1-6]
  • Mirdamadi, Shamsoddin Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]
  • Mirkazemi, Seyed Mohammad Coprecipitation Synthesis of CoFe2O4 Nanoparticles for Hyperthermia [Volume 50, Issue 2, 2017, Pages 105-110]
  • Mirkazemi, S. M. Ultrasonic–Assisted Co–Precipitation Method of Preparation of Nanocomposites in The Al2O3–TiO2–ZrO2 System: Characterization and Microsturcture [Volume 45, Issue 1, 2012, Pages 7-12]
  • Mirzadeh, Hamed Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties [Volume 48, Issue 1, 2015, Pages 53-58]
  • Mirzadeh, Hamed Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Mirzadeh, Hamed Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Mirzadeh, Hamed Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Mirzadeh, Hamed Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Mirzadeh, Hamed Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Mirzadeh, Hamed Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes [Volume 51, Issue 2, 2018, Pages 169-173]
  • Mirzadeh, Hamed Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Mirzadeh, Hamed Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Mirzadeh, Hamed Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties [Volume 54, Issue 1, 2021, Pages 112-120]
  • Mirzadeh, Hamed Superplasticity of fine-grained austenitic stainless steels: A review [Volume 56, Issue 1, 2023, Pages 27-41]
  • Mirzadeh, Hamed Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Mirzaei, Akbar Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Moalej, Nikta S. Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Moazami-Goudarzi, Mohammad Effect of SiC nanoparticles addition on densification of commercially pure Al and 5252 Al powder compacts [Volume 54, Issue 2, 2021, Pages 121-130]
  • Moazeni, Maryam The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Mobedpour, Bahareh Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]
  • Moeini, Ali Luminescent properties of graphene quantum dots (GQDs) functionalized with LCysteine [Volume 56, Issue 1, 2023, Pages 121-128]
  • Moghanian, Amirhossein Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Mohajerani, Seyed Sepehr Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Mohajeri, Soha An Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings [Volume 49, Issue 2, 2016, Pages 51-63]
  • Mohammad, Rezayat Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Mohammadi, Ali A study on the role of silica nanoparticles on the viscoelastic behavior of polyethylene [Volume 56, Issue 1, 2023, Pages 21-26]
  • Mohammadi, Somayeh The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Mohammad Nejad Fard, Navid Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets [Volume 50, Issue 1, 2017, Pages 1-5]
  • Mohseni, Farzin Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Mokhtarzadeh, Shafagh Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water [Volume 52, Issue 1, 2019, Pages 98-109]
  • Molaei, Mohammad Jafar Synthesis and characterization of lanthanum nickelate nanoparticles with Rudllesden-Popper crystal structure for cathode materials of solid oxide fuel cells [Volume 53, Issue 2, 2020, Pages 98-109]
  • Mollaei, Nafiseh Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Momeni, M. M. Design of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols [Volume 45, Issue 1, 2012, Pages 23-27]
  • Momeni Heravi, Mohammad Ehsan Application of nanogold in woolen textiles dyeing [Volume 55, Issue 1, 2022, Pages 65-69]
  • Monazzam, Pejman Immobilization of cobalt doped rutile TiO2 on carbon nanotubes walls for efficient photodegradation of 2,4-dichlorophenol under visible light [Volume 52, Issue 1, 2019, Pages 122-132]
  • Montakhab, Elham Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Montakhab, N. Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Montazer, Majid Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • Montazeri-pour, Mehdi Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis [Volume 49, Issue 1, 2016, Pages 11-16]
  • Moosavi, fatemeh Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films [Volume 54, Issue 2, 2021, Pages 173-179]
  • Moradi, M. The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Morady, Shiva Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Mortazavi, Vajihesadat Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Mortazavi, Yadollah The effect of ball-milling parameters on the structures of Ti3AlC2 MAX phase and resultant Ti3C2Tx MXene [Volume 55, Issue 2, 2022, Pages 112-121]
  • Mortazavi Samarin, Mohammadreza Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Mosleh-Shirazi, Sareh The impact of matrix microstructure and reinforcement size (micron vs. nano-size) on the compressibility of Al-SiC powder mixtures and hardness of Al/SiC composites [Volume 55, Issue 2, 2022, Pages 133-144]
  • Mostafapour, A. Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite [Volume 45, Issue 1, 2012, Pages 47-52]
  • Mostafapour, Meysam Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]
  • Mostafavi, Ebrahim Synthesis of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3 Perovskite by Co-Precipitation Method [Volume 48, Issue 1, 2015, Pages 45-52]
  • Motamed, Shadi Advances in nanocarriers as drug delivery systems in Atherosclerosis therapy [Volume 54, Issue 2, 2021, Pages 198-210]
  • Mousavi, Atieyeh Alsadate Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Msoudpanah, Seyyed Morteza Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Msoudpanah, Seyyed Morteza Effect of solvent’s types on the structure and magnetic properties of the as-coprecipitated Fe3O4 nanoparticles [Volume 51, Issue 2, 2018, Pages 163-168]
  • Msoudpanah, Seyyed Morteza Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]

N

  • Naderi, Elmira A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Naderi, Reza Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Nafar Dehsorkhi, Reihane Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Naghizadeh, Meysam Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Naizabekov, Abdrakhman Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Najafi, Abolfazl Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Najari, Alireza Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Nakhli, Yasamin The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Nami, Mohammad Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Nami, Navabeh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Naseri, Majid EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Naserifar, Mohammad Effect of fuel content on structural and magnetic properties of solution combusted Mn0.8Zn0.2Fe2O4 powders [Volume 51, Issue 1, 2018, Pages 26-31]
  • Nasiri, Hadi Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Nasiri, Hadi Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Nasseri, Shahab Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
  • Nazari, Maryam Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Nazari, Mohammad Mahdi Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
  • Neisi-Minaei, Saber Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties [Volume 48, Issue 1, 2015, Pages 53-58]
  • Nejatidanesh, Farahnaz Effect of Alumina Addition to Zirconia Nano-composite on Low Temperature Degradation Process and Biaxial Strength [Volume 49, Issue 2, 2016, Pages 103-111]
  • Niknam, Zeinab Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Nikoomanzari, Elham Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation [Volume 56, Issue 2, 2023, Pages 184-193]
  • Niroumand, Behzad Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • Noghani, Mohammad Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Noroozi, Zahra Fabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties [Volume 51, Issue 2, 2018, Pages 193-200]
  • Nouri, Afsaneh Silver-Doped Nanoclay with Antibacterial Activity [Volume 50, Issue 2, 2017, Pages 124-131]
  • Nouri, Mohammad Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Nuriev, Ali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]

O

  • Olamaee, Ali Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Omid, Hamed The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Ostadmahmoodi Do, Zahra Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics [Volume 49, Issue 1, 2016, Pages 43-47]

P

  • Panin, Evgeniy Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Paydar, Mohammad Hossein Investigation on the properties of high pressure torsion (HPT) processed Al/B4C composite [Volume 53, Issue 2, 2020, Pages 146-157]
  • Paydar, Mohammad Hosein A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Peymanfar, Reza Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Poorghorban, Morteza Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Poortavasoly, Hajar Functional polyester fabric through simultaneous aminolysis and nano ZnO synthesis [Volume 47, Issue 2, 2014, Pages 113-119]
  • Pourbahari, Bita Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy [Volume 50, Issue 2, 2017, Pages 132-136]
  • Pourbahari, Bita Significant grain refinement and enhanced mechanical properties of 6070 Al alloy via Ti/Sr addition and hot extrusion [Volume 53, Issue 2, 2020, Pages 190-203]

R

  • Rabiee, Mina Unraveling the Effects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy [Volume 49, Issue 1, 2016, Pages 17-21]
  • Rabiee, Seyed Mahmood Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Rafi, ud-din Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Rahi, Abbas Effect of grain size on the natural frequencies of high-strength steel HT-80 [Volume 55, Issue 2, 2022, Pages 145-151]
  • Rahimzadeh Lotfabad, Faraz Combined Hill-Taylor Theory: Theoretical, Experimental and Finite Element Study [Volume 54, Issue 2, 2021, Pages 228-243]
  • Rajabdoust, Sina Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]
  • Rajabi, Masoud Fabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties [Volume 51, Issue 2, 2018, Pages 193-200]
  • Rajabi, Mohammad Hydrogen Desorption Properties of Nanocrystalline MgH2-10 wt.% ZrB2 Composite Prepared by Mechanical Alloying [Volume 47, Issue 1, 2014, Pages 21-26]
  • Rajabpour, M. Investigation of Crack Resistance in Single Walled Carbon Nanotube Reinforced Polymer Composites Based on FEM [Volume 45, Issue 1, 2012, Pages 13-18]
  • Rajaei, Peyman Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Rakhsha, Amirhossein Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Ranjbar, Mehdi Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Rashchi, Fereshteh Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Rashchi, Fereshteh Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Rashchi, Fereshteh Photocatalytic properties of ZnO/CuO nanocomposite prepared in acidic media [Volume 55, Issue 1, 2022, Pages 21-30]
  • Rashidi, A. Synthesis and Characterization of SiO2-Carbon Nanotube Hybrides Using a Sol-Gel Method [Volume 45, Issue 1, 2012, Pages 29-34]
  • Rashidi, Sedigheh A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route [Volume 48, Issue 2, 2015, Pages 59-67]
  • Rasoolzadeh, Mina Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Ravanbakhsh, Arsalan Synthesis and characterization of porous zinc oxide nano-flakes film in alkaline media [Volume 51, Issue 1, 2018, Pages 32-42]
  • Raygan, Shahram Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Razavi, Hossein Zinc based bioalloys processed by severe plastic deformation – A review [Volume 53, Issue 1, 2020, Pages 39-47]
  • Reddy, Mogalahalli Venkatesh New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Reihanian, Mohsen A Comparative Corrosion Study of Al/Al2O3-SiC Hybrid Composite Fabricated by Accumulative Roll Bonding (ARB) [Volume 49, Issue 1, 2016, Pages 29-35]
  • Reihanian, Mohsen EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation [Volume 51, Issue 2, 2018, Pages 123-138]
  • Rezaei, Ali Reza Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Rezaei, Mohammad Reza Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]
  • Rezaei, Zahra 1D/2D mixed nanocomposite thin film of SnO2 /carbon nanotube/graphene [Volume 55, Issue 1, 2022, Pages 45-48]
  • Rezayan, Ali Hossein Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Rezvani, Alireza Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion [Volume 52, Issue 1, 2019, Pages 32-42]
  • Roshangar, Leila Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Rouhi, Hessam Exact solution for the vibrations of cylindrical nanoshells considering surface energy effect [Volume 48, Issue 2, 2015, Pages 113-124]
  • Rouhi, Hessam Effects of Fluid Environment Properties on the Nonlinear Vibrations of AFM Piezoelectric Microcantilevers [Volume 50, Issue 2, 2017, Pages 117-123]
  • Roumina, Reza Atomic Insights into the Melting Behavior of Metallic Nano-catalysts [Volume 50, Issue 2, 2017, Pages 81-89]

S

  • Saadati, Amir Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Saberi Tavakoli, Kimia Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Sabet, Ali Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice [Volume 46, Issue 1, 2013, Pages 47-54]
  • Sabet Bokati, Kazem Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface [Volume 50, Issue 1, 2017, Pages 33-42]
  • Sabooni, Soheil Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Saboori, Abdollah Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM) [Volume 56, Issue 2, 2023, Pages 213-223]
  • Sabour, Mohammad Reza Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP [Volume 56, Issue 1, 2023, Pages 42-49]
  • Sabour Rouhaghdam, Alireza Growth, corrosion, and wear study of nanocomposite PEO coating in electrolyte containing nickel sulfate [Volume 48, Issue 2, 2015, Pages 133-144]
  • Sadeghian, Behzad Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel [Volume 49, Issue 2, 2016, Pages 120-127]
  • Sadrhaghighi, Amirhouman Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Sadrnezhaad, Seyed Khatiboleslam The effect of TiO2 nanotubes on the biological properties of porous titanium foam by anodization technique for orthopedic application [Volume 56, Issue 1, 2023, Pages 99-107]
  • Saeedi, A. Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Saeid, Tohid Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel [Volume 51, Issue 1, 2018, Pages 20-25]
  • Saeidi, M Ultrasonic–Assisted Co–Precipitation Method of Preparation of Nanocomposites in The Al2O3–TiO2–ZrO2 System: Characterization and Microsturcture [Volume 45, Issue 1, 2012, Pages 7-12]
  • Safavi, Mir Saman A review on the prevalent fabrication methods, microstructural, mechanical properties, and corrosion resistance of nanostructured hydroxyapatite containing bilayer and multilayer coatings used in biomedical applications [Volume 52, Issue 1, 2019, Pages 1-17]
  • Safavi, Mir Saman New-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing [Volume 52, Issue 2, 2019, Pages 188-196]
  • Safavi, Mir Saman Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique [Volume 53, Issue 1, 2020, Pages 15-22]
  • Safiabadi Tali, Seyed Ali An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Saghafi, Morteza Graphene oxide nanoribbons and their applications in supercapacitors [Volume 47, Issue 2, 2014, Pages 71-76]
  • Saghafi Yazdi, Morteza Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Saghafi Yazdi, Morteza Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy [Volume 51, Issue 2, 2018, Pages 153-162]
  • Saghafi Yazdi, Morteza Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Saghafi Yazdi, Morteza Enhanced capacity and electrochemical performance of zinc cobalt selenide by using a novel two-stage synthesis method [Volume 55, Issue 2, 2022, Pages 161-171]
  • Sajadi, Nasim The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Sajjadnejad, Mohammad Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Salarvand, Vahid Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Salehi, Maryam Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Salehi, Maryam Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Salehi, Mina Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology [Volume 47, Issue 1, 2014, Pages 27-35]
  • Salehi, Mohammad Taghi Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Samadi, Ahad Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder [Volume 49, Issue 2, 2016, Pages 112-119]
  • Samadpour, Farshad Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Sanaee, Zeinab An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes [Volume 52, Issue 1, 2019, Pages 78-83]
  • Saraei, Mahnaz A Novel Initiator of [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl-2-bromo-2-methylpropanoateas in Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate [Volume 52, Issue 2, 2019, Pages 197-205]
  • Saremi, Mohsen Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Saremi, Mohsen Study of the Effect of Sol pH and Nanoclay Incorporation on the Corrosion Protection Performance of a Silane Sol-Gel Coating [Volume 47, Issue 1, 2014, Pages 9-14]
  • Saremi, Mohsen Oxidation resistance of the nanostructured YSZ coating on the IN-738 superalloy [Volume 47, Issue 2, 2014, Pages 89-96]
  • Sarkari Khorrami, Mahmoud Friction stir welding of ultrafine grained aluminum alloys: a review [Volume 54, Issue 1, 2021, Pages 1-20]
  • Sarmadi, Amin Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials [Volume 55, Issue 1, 2022, Pages 37-44]
  • Sarpoolaky, Hossein Ultrasonic–Assisted Co–Precipitation Method of Preparation of Nanocomposites in The Al2O3–TiO2–ZrO2 System: Characterization and Microsturcture [Volume 45, Issue 1, 2012, Pages 7-12]
  • Sarpoulaki, Hosein Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Sarvari, Raana 3D Scaffold Designing based on Conductive/Degradable Tetrapolymeric Nanofibers of PHEMA-co-PNIPAAm-co-PCL/PANI for Bone Tissue Engineering [Volume 51, Issue 2, 2018, Pages 101-114]
  • Sarvari, Raana Dual Nano-Carriers using Polylactide-block-Poly(N-isopropylacrylamide-random-acrylic acid) Polymerized from Reduced Graphene Oxide Surface for Doxorubicin Delivery Applications [Volume 53, Issue 1, 2020, Pages 60-70]
  • Sarvari, Raana Conductive Bio-Copolymers based on Pectin-Polycaprolactone/Polyaniline and Tissue Engineering Application Thereof [Volume 54, Issue 1, 2021, Pages 64-72]
  • Sasani, Nasrin Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Sattari, Roshana Preparation and physical characterization of Adonis vernalis aqueous leaf extract-mediated green synthesized silver nanoparticles and its toxicity effect on breast cancer cells [Volume 53, Issue 2, 2020, Pages 183-189]
  • Sazegaran, Hamid Photocatalysts Capability of Bentonite-ZnO Nanocomposite Synthesized by Solution Combustion in Ciprofloxacin Degradation [Volume 56, Issue 1, 2023, Pages 1-10]
  • Seifalian, Alexander M. The effect of SPION size and salting-out on transduction of PEGylated lentiviral vector [Volume 56, Issue 2, 2023, Pages 224-232]
  • Sepehrian, Mohammad Synthesis and Characterization of a Novel Modified ANA Zeolite Membrane [Volume 52, Issue 1, 2019, Pages 90-97]
  • Setoudeh, Nader Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Seyedi, Sheida Investigation of in-situ synthesis of alumina reinforcement and comparative flexural behavior with respect to ex-situ Al2O3 reinforced copper composite [Volume 54, Issue 1, 2021, Pages 101-111]
  • Seyyed Ebrahimi, S. A. Structural, Electrical and Optical Characterization of ZnO:Li Thin Films Prepared by Sol-Gel Spin Coating [Volume 56, Issue 1, 2023, Pages 108-120]
  • Seyyed Ebrahimi, Seyyed Ali Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation [Volume 49, Issue 2, 2016, Pages 72-79]
  • Shabani, Mahsa Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone [Volume 53, Issue 2, 2020, Pages 204-209]
  • Shabestri, S.G Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy [Volume 54, Issue 2, 2021, Pages 141-148]
  • Shadmani, Sepehr Toward hydrophobicity without surface functionalization through organosilane sol gel coatings on nano-roughed aluminum substrate [Volume 53, Issue 2, 2020, Pages 117-126]
  • Shafaei, Amineh Characterization and DFT Studies for Green Synthesis of Silver Nanoparticles by Morphine Ampules and their Anti-proliferation Activity [Volume 53, Issue 1, 2020, Pages 91-97]
  • Shafaei, Amineh Gene Expression Programming for Green Synthesis of Silver Nanoparticles: Size Evolution [Volume 54, Issue 2, 2021, Pages 180-191]
  • Shafei, Alireza Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Shafiei-Zarghan, Aziz Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Shahabodini, Abolfazl Multiscale Evaluation of the Nonlinear Elastic Properties of Carbon Nanotubes Under Finite Deformation [Volume 50, Issue 1, 2017, Pages 60-80]
  • Shahbazi Karami, Javad Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing [Volume 50, Issue 1, 2017, Pages 16-22]
  • Shahjuee, Tahereh Coprecipitation Synthesis of CoFe2O4 Nanoparticles for Hyperthermia [Volume 50, Issue 2, 2017, Pages 105-110]
  • Shahri, Farzad Effect of Joule-Heating Annealing on Giant Magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) Melt-Spun Ribbons [Volume 50, Issue 2, 2017, Pages 111-116]
  • Shahsavani, Ensieh Copper Oxide Nanoparticles Prepared by Solid State Thermal Decomposition: Synthesis and Characterization [Volume 49, Issue 1, 2016, Pages 48-50]
  • Shahsavari, Elnaz Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Shahtahmassebi, Nasser Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Sharafi, Shahriar Function finding via genetic expression programming to predict microhardness of Ni/Al2O3 nanocomposite coatings [Volume 54, Issue 1, 2021, Pages 73-84]
  • Shariati, Mohsen Optical Properties of ZnO Nanowires and Nanorods Synthesized by Two Step Oxidation Process [Volume 46, Issue 1, 2013, Pages 19-24]
  • Sharifi, I. Magnetic and Structural Investigations of Nanocrystalline Cobalt-Ferrite [Volume 45, Issue 1, 2012, Pages 35-40]
  • Sharifi, Ibrahim A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Shayanmehr, Mahdi On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Sheibani, Saeed Effect of hydrolysis rate on the properties of TiO2-CNT nanocomposite powder prepared by sol-gel method [Volume 51, Issue 1, 2018, Pages 90-95]
  • Sheibani, Saeed Preparation of nano-structured strontium carbonate from Dasht-e kavir celestite ore via mechanochemical method [Volume 51, Issue 2, 2018, Pages 147-152]
  • Sheibani, Saeed Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation [Volume 52, Issue 2, 2019, Pages 133-141]
  • Sheibani, Saeed Effect of calcination process on the gas phase photodegradation by CuO-Cu2O/TiO2 nanocomposite photocatalyst [Volume 53, Issue 1, 2020, Pages 23-30]
  • Sheibani, Saeed Effect of cathode size on the morphology of the anodized TiO2 nanotube photocatalyst [Volume 54, Issue 1, 2021, Pages 85-92]
  • Sheibani, Saeed Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]
  • Sheibani, Saeed Photocatalytic performance of SnS2 nanoflakes synthesized through a facile reflux method [Volume 56, Issue 2, 2023, Pages 129-136]
  • Sherafat, Zahra Piezoelectric properties of hot compression molded PVDF/SiC nanocomposites [Volume 54, Issue 2, 2021, Pages 192-197]
  • Sheykholeslami, Seyed Omid Reza Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration [Volume 53, Issue 1, 2020, Pages 31-38]
  • Sheykholeslami, Seyed Omid Reza The surface modification of Nitinol superelastic alloy with alkaline-heat treatment and hydroxyapatite/chitosan composite coating for biomedical applications [Volume 53, Issue 2, 2020, Pages 166-176]
  • Shirdel, Mohammad Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties [Volume 48, Issue 1, 2015, Pages 53-58]
  • Shojaei, Ali Effects of annealing treatment on microstructure, tensile properties and electrical conductivity of copper-graphene nanocomposite fabricated by accumulative roll bonding [Volume 56, Issue 2, 2023, Pages 194-204]
  • Shokrieh, M. M. A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube [Volume 46, Issue 1, 2013, Pages 61-66]
  • Shokrieh, M. Mehrdad Effects of Multi-Walled Carbon Nanotubes on The Mechanical Properties of Glass/Polyester Composites [Volume 45, Issue 1, 2012, Pages 19-22]
  • Shokri Rozbahani, zahra Synthesis and antibacterial performance of Ag/Co2O3/g-C3N4 nanocomposite [Volume 54, Issue 1, 2021, Pages 58-63]
  • Shokrollahi, H. Magnetic and Structural Investigations of Nanocrystalline Cobalt-Ferrite [Volume 45, Issue 1, 2012, Pages 35-40]
  • Shokrollahi, Hooman Magnetic and Electrical Properties of Nanocrystalline Fe85Si10Ni5/Phenolic Resin Soft Magnetic Composites [Volume 53, Issue 1, 2020, Pages 9-14]
  • Siahsarani, Armin Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure [Volume 52, Issue 1, 2019, Pages 25-31]
  • Sobhani, Manoochehr The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Sohrabi, Mohammad Javad Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran [Volume 53, Issue 2, 2020, Pages 210-223]
  • Sohrabi, Mohammad Javad Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing [Volume 56, Issue 2, 2023, Pages 165-172]
  • Soleimani, Maryam Quantifying the dependency of uniform corrosion of structural steel on grain size [Volume 52, Issue 2, 2019, Pages 206-209]
  • Solouki, Hanieh The effect of temperature and strain rate on elongation to failure in nanostructured Al-0.2wt% Zr alloy fabricated by ARB process [Volume 48, Issue 2, 2015, Pages 125-132]
  • Soltani, Reza In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Soroushian, Soheil Hardness Optimization for Al6061-MWCNT Nanocomposite Prepared by Mechanical Alloying Using Artificial Neural Networks and Genetic Algorithm [Volume 50, Issue 1, 2017, Pages 23-32]
  • Stolyarov, Vladimir Vladimirovich Structure refinement of shape memory alloys under severe electroplastic rolling [Volume 55, Issue 1, 2022, Pages 10-14]
  • Sun, Hui Investigation of post-annealing treatment effect on film properties of sputter-deposited BiVO4 nanoporous photocatalyst [Volume 55, Issue 2, 2022, Pages 89-96]

T

  • T, Rasmi Review on Various Synthesis Methods of Bismuth Telluride Nanoparticles [Volume 54, Issue 2, 2021, Pages 211-218]
  • Taher, Mohammad Ali Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method [Volume 47, Issue 1, 2014, Pages 15-19]
  • Taherzadeh Mousavian, Reza Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite [Volume 47, Issue 2, 2014, Pages 63-70]
  • Talafi Noghani, Mohammad Effect of processing parameters on the mechano-chemical synthesis of nano crystalline Mo-Cu/Al2O3 composite [Volume 51, Issue 1, 2018, Pages 13-19]
  • Talafi Noghani, Mohammad Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling [Volume 52, Issue 2, 2019, Pages 164-174]
  • Tamjid, Elnaz In vitro Corrosion Behavior and Biological Properties of Magnesium- Zinc-Calcium Alloy Coated with Polycaprolactone Nanofibers [Volume 54, Issue 1, 2021, Pages 93-100]
  • Tavakoli, Hossein The effect of cobalt addition on the meso-porous structured γ-Alumina synthesized by aqueous sol-gel method [Volume 52, Issue 1, 2019, Pages 84-89]
  • Tavoosi, Majid Glass formation in Cu50Zr50-xAlx and (Cu50Zr43Al7)100-xNbx alloys [Volume 56, Issue 2, 2023, Pages 205-212]
  • Teymuri Sangari, Mohammad Mahdi Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Tian, Li Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • T. Kajineh Baf, Vahideh Rapid Synthesis of Nanostructured Pure Anatase TiO2 with High Thermal Stability by Polymeric Sol-Gel Route [Volume 46, Issue 1, 2013, Pages 39-45]
  • Torabi, Mohsen Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing [Volume 50, Issue 2, 2017, Pages 90-97]
  • Torkan, S. The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation [Volume 45, Issue 1, 2012, Pages 41-45]
  • Toroghinezhad, Mohammadreza The effect of temperature and strain rate on elongation to failure in nanostructured Al-0.2wt% Zr alloy fabricated by ARB process [Volume 48, Issue 2, 2015, Pages 125-132]
  • Toroghinezhad, Mohammadreza Analysis of Strengthening Mechanisms in an Artificially Aged Ultrafine Grain 6061 Aluminum Alloy [Volume 50, Issue 2, 2017, Pages 152-160]

V

  • Vaghar, R. Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Vaghari, Majid Studying on the fatigue behavior of Al- Al2O3 metal matrix nano composites processed through powder metallurgy [Volume 52, Issue 2, 2019, Pages 210-217]
  • Vahdati Khaki, Jalil Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Vahdati Khaki, Jalil Facile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process [Volume 48, Issue 1, 2015, Pages 37-44]
  • Vahdati Khaki, Jalil Ni-Al2O3 Nanocomposite with High Specific Surface Area Synthesized by Mixture of Fuels through Solution Combustion [Volume 55, Issue 2, 2022, Pages 122-132]
  • Vahedi, Shaghayegh Carbon nanotubes reinforced electrospun chitosan nanocomposite coating on anodized AZ31 magnesium alloy [Volume 53, Issue 1, 2020, Pages 71-77]
  • Volokitin, Andrey Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Volokitin, Andrey Obtaining long products by severe plastic deformation methods: A Review [Volume 56, Issue 1, 2023, Pages 84-98]
  • Volokitina, Irina Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]

X

  • Xu, Hongmei Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]

Y

  • Yahyazadeh, Asieh Biosynthesised Sm2O3 NPs as an efficient catalyst for the preparation of morpholine and piperidine derivatives [Volume 55, Issue 1, 2022, Pages 78-88]
  • Yaqubov, Ali Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology [Volume 53, Issue 1, 2020, Pages 78-90]
  • Yazdani, Ahmad Synthesis and characterization of Fe3O4@Ag core-shell: structural, morphological, and magnetic properties [Volume 47, Issue 2, 2014, Pages 97-103]
  • Yeganeh, Mahdi Effect of Incorporation of Inhibitor Loaded Mesoporous Silica on the Corrosion Behavior of Epoxy Coatings [Volume 46, Issue 1, 2013, Pages 11-17]
  • Yektaei, Mona Investigation of particle size effect on antibacterial activity of copper ferrite using polyvinylidene fluoride (PVDF) and silicone rubber matrices [Volume 54, Issue 1, 2021, Pages 21-28]
  • Yerzhanov, Almas Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review [Volume 55, Issue 2, 2022, Pages 97-111]
  • Yousefieh, Mohammad Friction Stir Welding/Processing of Aluminum Alloys with and without Adding Nanoparticles: A Review on the Microstructure, Texture, and Hardness [Volume 56, Issue 1, 2023, Pages 50-67]
  • Yousefi-Zavieh, Hamidreza Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys [Volume 55, Issue 2, 2022, Pages 152-160]
  • Yousofi, Mehran Photocatalytic Decolorization of Methyl Orange by Silica-Supported TiO2 Composites [Volume 50, Issue 1, 2017, Pages 43-50]

Z

  • Zakeri, Mahnaz On the Mechanical Properties of Chiral Carbon Nanotubes [Volume 46, Issue 1, 2013, Pages 1-9]
  • Zakeri, Mahnaz Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs [Volume 49, Issue 1, 2016, Pages 1-10]
  • Zamani, Cyrus Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica [Volume 49, Issue 2, 2016, Pages 92-96]
  • Zamani, Cyrus Mechanochemical Synthesis of Nanostructured MgXNi1-XO Compound by Mg-NiO Mixture [Volume 50, Issue 1, 2017, Pages 51-59]
  • Zamani, Cyrus Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries [Volume 51, Issue 2, 2018, Pages 115-122]
  • Zamani, Cyrus Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route [Volume 52, Issue 2, 2019, Pages 149-153]
  • Zamani, Cyrus Cryomilling-Assisted Synthesis of Nanostructured Silicon [Volume 53, Issue 2, 2020, Pages 158-165]
  • Zamani, Cyrus Fabricating Graphite Coated Copper Via Airbrushing [Volume 55, Issue 2, 2022, Pages 194-199]
  • Zamani, Rashadoddin Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling [Volume 51, Issue 1, 2018, Pages 71-76]
  • Zamanian, Ali A Simple Thermal Decomposition Method for Synthesis of Co0.6Zn0.4Fe2O4 Magnetic Nanoparticles [Volume 49, Issue 2, 2016, Pages 87-91]
  • Zarei-Hanzaki, A. Discontinuous Dynamic Recrystallization during Accumulative Back Extrusion of a Magnesium Alloy [Volume 46, Issue 1, 2013, Pages 25-29]
  • Zarei-Hanzaki, Abbas Evolution of texture in an ultrafine and nano grained magnesium alloy [Volume 48, Issue 1, 2015, Pages 11-16]
  • Zarei-Hanzaki, Abbas Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures [Volume 48, Issue 2, 2015, Pages 69-83]
  • Zarei-Hanzaki, Abbas Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy [Volume 50, Issue 1, 2017, Pages 6-15]
  • Zarei-Hanzaki, Abbas Effect of Zener-Hollomon Parameter on Microstructure of Aluminum Based Nanocomposite Layers Produced by Friction Stir Processing [Volume 54, Issue 1, 2021, Pages 29-39]
  • Zarinkamar, Mahsa Synthesis of nano-sized ceria (CeO2) particles via a cerium hydroxy carbonate precursor and the effect of reaction temperature on particle morphology [Volume 48, Issue 1, 2015, Pages 5-10]
  • Zebarjad, Seyed Mojtaba Characterization of Rod-like High-purity Fluorapatite Nanopowders Obtained by Sol-gel Method [Volume 46, Issue 1, 2013, Pages 31-37]
  • Zebarjad, Seyed Mojtaba - Fiber Diameter Dependency of Electrospun Polysulfone/SiO2/TiO2 Nanocomposite Membranes on the Solution Properties [Volume 55, Issue 1, 2022, Pages 15-20]
  • Zebarjad, Seyed Mojtaba A study on the role of silica nanoparticles on the viscoelastic behavior of polyethylene [Volume 56, Issue 1, 2023, Pages 21-26]
  • Zebarjad, Seyed Mojtaba Fabrication and characterization of electrospun PVA/Cs/CNT fibers [Volume 56, Issue 2, 2023, Pages 137-146]
  • Zenoozi, Sahar Scattering Study of Conductive-Dielectric Nano/Micro-Grained Single Crystals Based on Poly(ethylene glycol), Poly(3-hexyl thiophene) and Polyaniline [Volume 50, Issue 2, 2017, Pages 137-151]
  • Zeraati, Malihe Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm [Volume 51, Issue 2, 2018, Pages 183-192]
  • Zhang, Huajian Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]
  • Zhao, Yuping Combustion-aminolysis synthesis and characterization of CrN/Cu composites [Volume 53, Issue 1, 2020, Pages 1-8]