Fabrication and characterization of electrospun PVA/Cs/CNT fibers

Document Type : Research Paper

Authors

1 Department of Materials Science and Engineering- School of Engineering- Shiraz University.

2 Shiraz UniversityDepartment of Materials Science and Engineering- School of Engineering- Shiraz University.

Abstract

Polyvinyl alcohol (PVA)/chitosan (CS) and PVA/ CS/carbon nanotube (CNT) nanofibers were fabricated by electrospinning method. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and water contact angle (WCA) tests were used to evaluate the morphology and some properties of electrospun fibers. The results showed that the most appropriate mass ratio of PVA/Cs resulting in uniform and smooth nanofibers was 2.8:1, and this morphology was not affected by the addition of CNT. However, the presence of CNT caused a significant decrease in fibers’ diameter from 519 nm to 85 nm. The compatibility of CNT with PVA/Cs and crosslinking between the components was confirmed by the XRD and FTIR analysis. Improving the hydrophilic properties of the fibrous mat was admitted by the WCA test.
Keywords: Polyvinyl alcohol (PVA);chitosan (CS); Carbon nanotube (CNT), Electrospinning

Keywords


1- Cooper, A., Bhattarai, N., & Zhang, M. (2011). Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration. Carbohydrate Polymers, 85(1), 149-156.
2- Wang, S. F., Shen, L., Zhang, W. D., & Tong, Y. J. (2005). Preparation and mechanical properties of chitosan/carbon nanotubes composites. Biomacromolecules, 6(6), 3067-3072.
3- Yu, R., Ran, M., Wen, J., Sun, W., Chu, W., Jiang, C., & He, Z. (2015). The effect of hydroxylation on CNT to form Chitosan-CNT composites: A DFT study. Applied Surface Science, 359, 643-650.
4- Ajayan, P. M. (1999). Nanotubes from carbon. Chemical reviews, 99(7), 1787-1800.
5- Dozois, M. D., Bahlmann, L. C., Zilberman, Y., & Tang, X. S. (2017). Carbon nanomaterial-enhanced scaffolds for the creation of cardiac tissue constructs: A new frontier in cardiac tissue engineering. Carbon, 120, 338-349.
6- Mallakpour, S., & Rashidimoghadam, S. (2018). Application of ultrasonic irradiation as a benign method for production of glycerol plasticized-starch/ascorbic acid functionalized MWCNTs nanocomposites: Investigation of methylene blue adsorption and electrical properties. Ultrasonics sonochemistry, 40, 419-432.
7- Correa-Duarte, M. A., Wagner, N., Rojas-Chapana, J., Morsczeck, C., Thie, M., & Giersig, M. (2004). Fabrication and biocompatibility of carbon nanotube-based 3D networks as scaffolds for cell seeding and growth. Nano Letters, 4(11), 2233-2236.
8- Ji, J., Sui, G., Yu, Y., Liu, Y., Lin, Y., Du, Z., ... & Yang, X. (2009). Significant improvement of mechanical properties observed in highly aligned carbon-nanotube-reinforced nanofibers. The Journal of Physical Chemistry C, 113(12), 4779-4785.
9- Hou, H., Ge, J. J., Zeng, J., Li, Q., Reneker, D. H., Greiner, A., & Cheng, S. Z. (2005). Electrospun polyacrylonitrile nanofibers containing a high concentration of well-aligned multiwall carbon nanotubes. Chemistry of Materials, 17(5), 967-973.
10- Liu, X., Wang, M., Zhang, S., & Pan, B. (2013). Application potential of carbon nanotubes in water treatment: a review. Journal of Environmental Sciences, 25(7), 1263-1280.
11- Bhardwaj, N., & Kundu, S. C. (2010). Electrospinning: a fascinating fiber fabrication technique. Biotechnology advances, 28(3), 325-347.
12- Rathna, G. V. N., Jog, J. P., & Gaikwad, A. B. (2011). Development of non-woven nanofibers of egg albumen-poly (vinyl alcohol) blends: influence of solution properties on morphology of nanofibers. Polymer journal, 43(7), 654.
13- Ignatova, M., Starbova, K., Markova, N., Manolova, N., & Rashkov, I. (2006). Electrospun nano-fibre mats with antibacterial properties from quaternised chitosan and poly (vinyl alcohol). Carbohydrate research, 341(12), 2098-2107.
14- Neamnark, A., Rujiravanit, R., & Supaphol, P. (2006). Electrospinning of hexanoyl chitosan. Carbohydrate polymers, 66(3), 298-305.
15- Jia, Y. T., Gong, J., Gu, X. H., Kim, H. Y., Dong, J., & Shen, X. Y. (2007). Fabrication and characterization of poly (vinyl alcohol)/chitosan blend nanofibers produced by electrospinning method. Carbohydrate Polymers, 67(3), 403-409.
16- Li, L., & Hsieh, Y. L. (2006). Chitosan bicomponent nanofibers and nanoporous fibers. Carbohydrate research, 341(3), 374-381.
17- Zheng, H., Du, Y., Yu, J., Huang, R., & Zhang, L. (2001). Preparation and characterization of chitosan/poly (vinyl alcohol) blend fibers. Journal of Applied Polymer Science, 80(13), 2558-2565.
18- Alhosseini, S. N., Moztarzadeh, F., Mozafari, M., Asgari, S., Dodel, M., Samadikuchaksaraei, A., ... & Jalali, N. (2012). Synthesis and characterization of electrospun polyvinyl alcohol nanofibrous scaffolds modified by blending with chitosan for neural tissue engineering. International journal of nanomedicine, 7, 25.
19- Liao, H., Qi, R., Shen, M., Cao, X., Guo, R., Zhang, Y., & Shi, X. (2011). Improved cellular response on multiwalled carbon nanotube-incorporated electrospun polyvinyl alcohol/chitosan nanofibrous scaffolds. Colloids and Surfaces B: Biointerfaces, 84(2), 528-535.
20- Zhang, Y., Huang, X., Duan, B., Wu, L., Li, S., & Yuan, X. (2007). Preparation of electrospun chitosan/poly (vinyl alcohol) membranes. Colloid and Polymer Science, 285(8), 855-863.
21- Li, W. J., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002). Electrospun nanofibrous structure: a novel scaffold for tissue engineering. Journal of Biomedical Materials Research Part A, 60(4), 613-621.
22- Lee, H., Watanabe, K., Kim, M., Gopiraman, M., Song, K. H., Lee, J. S., & Kim, I. S. (2016). Handspinning enabled highly concentrated carbon nanotubes with controlled orientation in nanofibers. Scientific reports, 6, 37590.
23- Mazinani, S., Ajji, A., & Dubois, C. (2009). Morphology, structure and properties of conductive PS/CNT nanocomposite electrospun mat. Polymer, 50(14), 3329-3342.24- Liu, Z. H., Pan, C. T., Lin, L. W., & Lai, H. W. (2013). Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning. Sensors and Actuators A: Physical, 193, 13-24.
25- Amirian, M., Chakoli, A. N., Cai, W., & Sui, J. (2013). Effect of functionalized multiwalled carbon nanotubes on thermal stability of poly (L-LACTIDE) biodegradable polymer. Scientia Iranica, 20(3), 1023-1027.
26- Mallakpour, S., Abdolmaleki, A., & Borandeh, S. (2015). Surface functionalization of GO, preparation and characterization of PVA/TRIS-GO nanocomposites. Polymer, 81, 140-150.
27- Dong, W., Hou, L., Li, T., Gong, Z., Huang, H., Wang, G., ... & Li, X. (2015). A dual role of graphene oxide sheet deposition on titanate nanowire scaffolds for osteo-implantation: mechanical hardener and surface activity regulator. Scientific Reports, 5, 18266.
28- Kaur, T., & Thirugnanam, A. (2016). Tailoring in vitro biological and mechanical properties of polyvinyl alcohol reinforced with threshold carbon nanotube concentration for improved cellular response. RSC Advances, 6(46), 39982-39992.
29- Jamnongkan, T., & Kaewpirom, S. (2010). Potassium release kinetics and water retention of controlled-release fertilizers based on chitosan hydrogels. Journal of Polymers and the Environment, 18(3), 413-421.
30- Ghosal, K., Chandra, A., Praveen, G., Snigdha, S., Roy, S., Agatemor, C., ... & Provaznik, I. (2018). Electrospinning over Solvent Casting: Tuning of Mechanical Properties of Membranes. Scientific reports8(1), 5058.
31- Zhang, H., Li, S., White, C. J. B., Ning, X., Nie, H., & Zhu, L. (2009). Studies on electrospun nylon-6/chitosan complex nanofiber interactions. Electrochimica Acta54(24), 5739-5745.
32- Sankal, S., & Kaynak, C. (2013). Using various techniques to characterize oxidative functionalized and aminosilanized carbon nanotubes for polyamide matrix. Journal of Reinforced Plastics and Composites, 32(2), 75-86.
33- Hu, S. Y., Zhang, Y., Lawless, D., & Feng, X. (2012). Composite membranes comprising of polyvinylamine-poly (vinyl alcohol) incorporated with carbon nanotubes for dehydration of ethylene glycol by pervaporation. Journal of membrane science, 417, 34-44.
34- Wang, Q., Fu, Y., Yan, X., Chang, Y., Ren, L., & Zhou, J. (2017). Preparation and characterization of underwater superoleophobic chitosan/poly (vinyl alcohol) coatings for self-cleaning and oil/water separation. Applied Surface Science, 412, 10-18.
35- Rafique, A., Zia, K. M., Zuber, M., Tabasum, S., & Rehman, S. (2016). Chitosan functionalized poly (vinyl alcohol) for prospects biomedical and industrial applications: a review. International journal of biological macromolecules, 87, 141-154.
36- Kavalenka, M. N., Vüllers, F., Kumberg, J., Zeiger, C., Trouillet, V., Stein, S., & Hölscher, H. (2017). Adaptable bioinspired special wetting surface for multifunctional oil/water separation. Scientific reports, 7, 39970.